| 430铁素体不锈钢A-TIG焊接 |
| |
| 引用本文： | 胡绳荪,王勇慧,申俊琦,陈昌亮,许海刚.430铁素体不锈钢A-TIG焊接[J].天津大学学报(自然科学与工程技术版),2013(9):831-835. |
| |
| 作者姓名： | 胡绳荪 王勇慧 申俊琦 陈昌亮 许海刚 |
| |
| 作者单位： | 天津大学材料科学与工程学院;天津市现代连接技术重点实验室;宝山钢铁股份有限公司研究院 |
| |
| 摘 要： | 针对铁素体不锈钢，选用常见的氧化物和卤化物进行单组分A-TIG实验，结果表明氧化物活性剂增加焊缝熔深的效果更为显著．以B2O3、Cr2O3、SiO2分别作为基础组元进行多组分活性剂实验，得到最优配比的活性剂可使焊缝熔深达到传统TIG焊的2．46倍．组织和力学性能测试显示：与TIG焊缝相比，使用活性剂后焊缝中的铁素体晶粒尺寸略有减小，但硬度和拉伸强度变化不大．
|
| 关 键 词： | 铁素体不锈钢 A-TIG 焊缝熔深 微观组织 力学性能 |
A-TIG Welding of 430 Ferritic Stainless Steel |
| |
| Hu Shengsun;Wang Yonghui;Shen Junqi;Chen Changliang;Xu Haigang.A-TIG Welding of 430 Ferritic Stainless Steel[J].Journal of Tianjin University(Science and Technology),2013(9):831-835. |
| |
| Authors: | Hu Shengsun;Wang Yonghui;Shen Junqi;Chen Changliang;Xu Haigang |
| |
| Institution: | Hu Shengsun;Wang Yonghui;Shen Junqi;Chen Changliang;Xu Haigang;School of Materials Science and Engineering,Tianjin University;Tianjin Key Laboratory of Advanced Joining Technology;Research Institute,Baoshan Iron and Steel Company Limited; |
| |
| Abstract: | Study of the effects of common oxides and halides in single component A-TIG experiments indicates that oxide fluxes perform better in increasing weld penetration of ferritic stainless steel. B2O3, Cr2O3 and SiO2 are used as the basic elements of the multi-component activating flux. The optimal flux can make weld penetration 2.46 times as much as that with conventional TIG welding. Through the structure analysis and mechanical properties tests, it has been found that A-TIG welding seam has a slight decrease in ferrite grain size with few changes in hardness and ten- sile strength of A-TIG welding seam compared with conventional TIG welding seam. |
| |
| Keywords: | ferritic stainless steel A-TIG weld penetration microstructure mechanical property |
| 本文献已被 CNKI 维普 等数据库收录！ |
