| 管接头切口相贯线加工装置设计 |
| |
| 引用本文： | 戴俊平.管接头切口相贯线加工装置设计[J].陕西理工学院学报(自然科学版),1996(2). |
| |
| 作者姓名： | 戴俊平 |
| |
| 作者单位： | 陕西工学院机械系 |
| |
| 摘 要： | 通过对圆柱管道垂直正交相贯线的研究，对直径不同的垂直正交管道焊接切口曲线加工原理进行了分析，设计出一种结构简单调整方便的切口曲线加工装置。
|
| 关 键 词： | 管道垂直正交 相贯线 切口加工 |
The Design of a Processing Device for Intersecting Lines of Pipe Orifice Cuttings |
| |
| Dai,Junping.The Design of a Processing Device for Intersecting Lines of Pipe Orifice Cuttings[J].Journal of Shananxi University of Technology:Natural Science Edition,1996(2). |
| |
| Authors: | Dai Junping |
| |
| Institution: | Dept.of M.E.of Shaanxi Institute of Technology |
| |
| Abstract: | After having studiedthe intersecting lines for vertical orthogonal cylindrical pipes,the writer analyses the processing principle of curves of soldering joint of vertical-orthogonal cylindrical pipes in this paper,According to this principle,the writer desgns a processing device for intersecting lines of pipe orifice cuttings,which is of simple structure and also easy to adjust. |
| |
| Keywords: | Vertical-Orthogonal Pipes:Intersecting line Processing for Pipe Orifice |
| 本文献已被 CNKI 等数据库收录！ |
