| 小直径TA2/0Cr18Ni9Ti棒材储能焊工艺参数优化设计 |
| |
| 引用本文： | 徐峰.小直径TA2/0Cr18Ni9Ti棒材储能焊工艺参数优化设计[J].陕西理工学院学报(自然科学版),2014(3):15-17,33. |
| |
| 作者姓名： | 徐峰 |
| |
| 作者单位： | 陕西理工学院材料科学与工程学院,陕西汉中723003 |
| |
| 基金项目： | 陕西省教育厅科研基金资助项目（2013JK0911） |
| |
| 摘 要： | 采用微型储能焊机对Φ2.5 mm的异种棒材进行储能焊接研究。采用正交试验设计方法进行焊接参数优化设计,研究了焊接工艺参数与焊接接头抗拉强度和断裂特征的关系。试验结果表明,当焊接参数采用电压195 V,电极压力15 N,电容9 900μF时,焊接接头拉伸强度可达到708.23 MPa。
|
| 关 键 词： | 储能焊对焊 正交试验 接头组织与性能 |
The capacitor discharge welding parameters optimization of TA2 and 0 Cr18 Ni9 Ti small-sized bars |
| |
| XU Feng.The capacitor discharge welding parameters optimization of TA2 and 0 Cr18 Ni9 Ti small-sized bars[J].Journal of Shananxi University of Technology:Natural Science Edition,2014(3):15-17,33. |
| |
| Authors: | XU Feng |
| |
| Institution: | XU Feng ( School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong 723003, China) |
| |
| Abstract: | Using mini welder , the study focuses on storage capacity welding of dissimilar bar with the size of Φ2.5 mm.A parametric optimization is completed with orthogonal disign .The effects of welding parameters on the tensile strength and fracture characteristic have been studied through a series of experiments using orthogonal experiment method .The results show that ,at the condition of welding voltage 195 V, capaci-tance 9 900 μF and pole pressure 15 N, the tensile strength of welded joints can reach 708.23 MPa. |
| |
| Keywords: | capacitor discharge welding orthogonal experiment microstructure and property of joint |
| 本文献已被 维普 等数据库收录！ |
