| 轧机辊缝控制建模及仿真 |
| |
| 引用本文： | 谭树彬,钟云峰,刘建昌,徐心和. 轧机辊缝控制建模及仿真[J]. 系统仿真学报, 2006, 18(6): 1425-1427 |
| |
| 作者姓名： | 谭树彬 钟云峰 刘建昌 徐心和 |
| |
| 作者单位： | 1. 东北大学信息科学与工程学院,辽宁沈阳,110004
2. 上海宝山钢铁股份有限公司热轧厂,上海,201900 |
| |
| 摘 要： | 液压AGC已经成为现代带钢轧机中控制带钢厚度的关键设备,通过对某轧机液压系统深入的研究和分析,并参考典型的液压元件的作用机理,完全地建立了轧机液压AGC系统的数学模型。最后,利用MATLAB语言对所建立起来的液压AGC数学模型进行了计算机仿真,结果表明和实际所测得的响应曲线非常近似。
|
| 关 键 词： | 液压AGC 系统仿真 建模 连轧机 |
| 文章编号： | 1004-731X（2006）06-1425-03 |
| 收稿时间： | 2005-04-18 |
| 修稿时间： | 2006-02-13 |
Modeling and Simulation of Rolling Gap Control in Strip Mills |
| |
| TAN Shu-bin,ZHONG Yun-feng,LIU Jian-chang,XU Xin-he. Modeling and Simulation of Rolling Gap Control in Strip Mills[J]. Journal of System Simulation, 2006, 18(6): 1425-1427 |
| |
| Authors: | TAN Shu-bin ZHONG Yun-feng LIU Jian-chang XU Xin-he |
| |
| Affiliation: | 1.College of Information Science and Engineering, Northeastern University, Shenyang 110004, China; 2 Hot Strip Rolling Plant of Shanghai BaoSteel, Shanghai 201900, China |
| |
| Abstract: | Hydraulic automatic gauge control(AGC)system has become one of key equipments to control the exit strip thickness in strip rolling mills.The hydraulic AGC system of a hot rolling mill was researched and analyzed,and its mathematics models were founded in whole based on the action principle of some representative hydraulic components.At last,the hydraulic AGC system was simulated with MATLAB by computer.It is obvious that the simulation curves are similar to the real response curves very much. |
| |
| Keywords: | hydraulic automatic gauge control continuous rolling mill modeling system simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
