|
|||||
|
|
| 聚丙烯的官能化及其与尼龙6相容性 | |
| 引用本文： | 李海东 程凤梅 罗靖. 聚丙烯的官能化及其与尼龙6相容性[J]. 吉林工学院学报, 2005, 26(3): 184-186 |
| 作者姓名： | 李海东 程凤梅 罗靖 |
| 作者单位： | 长春工业大学化学工程学院,吉林长春130012 |
| 基金项目： | 国家重大基础研究“973”基金资助项目（G1999064800） |
| 摘 要： | 以甲基丙烯酸环氧丙酯为单体,过氧化二异丙苯为引发剂,对聚丙烯进行官能化,主要研究了反应单体浓度、引发剂浓度、停留时间对接枝率和熔融指数的影响,再将不同接枝率的聚丙烯与尼龙6共混,研究接枝率对共混物力学性能及相容性的影响.结果表明,接枝率随单体浓度的增加而增加,随引发剂含量的增加达到峰值后下降;PA6/PP-g-GMA的机械性能较PA6/PP有显著提高. |
| 关 键 词： | 聚丙烯 甲基丙烯酸环氧丙酯 官能化 尼龙6 接枝率 引发剂 |
| 文章编号： | 1006-2939（2005）03-0184-03 |
| 收稿时间： | 2004-12-15 |
| 修稿时间： | 2004-12-15 |
Functionalization of PP and a study on nylon6/PP compatibility |
|
| LI Hai-dong, CHENG Feng-mei, LUO Jing. Functionalization of PP and a study on nylon6/PP compatibility[J]. Journal of Jilin Institute of Technology, 2005, 26(3): 184-186 | |
| Authors: | LI Hai-dong CHENG Feng-mei LUO Jing |
| Affiliation: | School of Chemical Engineering, Changchun University of Technology, Changchun 130012, China |
| Abstract: | Polypropylene(PP) was functionized with glycidyl methacrylate(GMA).The influences of the monomer content,initiator content and rotation speed of screw on the grafted ratio and melt flow rate were studied.The GMA grafted and pure PP were blended with nylon6 respectively.It is found that the mechanical properties of the alloy PA6/PP-g-GMA are much better than that of the alloy PA6/PP,which shows that the compatibility between nylon6 and PP is improved.It is also found that the morphologies significantly depend upon the compatibilizer content,molecular weight and the(functionated) group content.It is obvious that the grafting of PP-g-GMA improves the interfacial(adhesion) of PA6 and PP.The dispersion size of compatibilized blends is reduced compared with that of uncompatibilized blends. |
| Keywords: | polypropylene(PP) glycidyl methacrulate(GMA) functionlization nylon6 grafted ratio initiator. |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |