| T10A钢成型模具的失效分析及热处理工艺的改进 |
| |
| 引用本文： | 高为国,胡凤兰,董丽君,全艳丽.T10A钢成型模具的失效分析及热处理工艺的改进[J].湖南工程学院学报(自然科学版),2006,16(2):21-23. |
| |
| 作者姓名： | 高为国 胡凤兰 董丽君 全艳丽 |
| |
| 作者单位： | 1. 湖南工程学院,机械工程系,湖南,湘潭,411101
2. 湖南工程学院,金属材料工程专业0301班,湖南,湘潭,411101 |
| |
| 摘 要： | 结合T10A钢胶木成型模具的具体工作条件、性能要求和失效形式,采用性能(硬度)测试和金相显微分析等研究手段,分析了T10A钢胶木成型模具失效的主要原因,在失效分析和试验研究的基础上,有针对性的改进了T10A钢胶木成型模具的热处理工艺.研究结果表明,通过优化和改进模具的热处理工艺及其参数,有效地改善了胶木成型模具的使用性能,提高了模具的使用寿命.
|
| 关 键 词： | 失效分析 成型模具 热处理 显微组织 性能 |
| 文章编号： | 1671-119X（2006）02-0021-03 |
| 收稿时间： | 2006-02-14 |
| 修稿时间： | 2006年2月14日 |
Failure Analysis of Bakelite Forming Die T10A and Its Improvement of Heat Treatment Process |
| |
| GAO Wei-guo,HU Feng-lan,DONG Li-jun,QUAN Yan-li.Failure Analysis of Bakelite Forming Die T10A and Its Improvement of Heat Treatment Process[J].Journal of Hunan Institute of Engineering(Natural Science Edition),2006,16(2):21-23. |
| |
| Authors: | GAO Wei-guo HU Feng-lan DONG Li-jun QUAN Yan-li |
| |
| Institution: | 1. Dept. of Mech. Eng. , Hunan Institute of Engineering, Xiangtan 411101, China; 2. Metal Material Engineering, Class 0301, Hunan Institute of Engineering, Xiangtan 411101, China |
| |
| Abstract: | According to concrete working conditions,property requirements and failure forms,the author analyzes the major causes of the failure of bakelite forming dies by hardness test and microstructure analysis.The heat treatment process of bakelite forming die T10A is improved through failure analysis and experiment research.The results demonstrate that the life of bakelite forming die can be effectively improved by optimzing its heat treatment process and changing it parameters. |
| |
| Keywords: | failure analysis forming die heat treatment microstructure property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
