首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于钢丝绳结构特征的断丝漏磁霍尔效应检测方法
引用本文:康宜华,杨克冲,杨叔子,卢文祥.基于钢丝绳结构特征的断丝漏磁霍尔效应检测方法[J].华中科技大学学报(自然科学版),1992(Z1).
作者姓名:康宜华  杨克冲  杨叔子  卢文祥
作者单位:华中理工大学机械工程一系 (康宜华,杨克冲,杨叔子),华中理工大学机械工程一系(卢文祥)
基金项目:国家自然科学基金资助项目
摘    要:根据钢丝绳断丝的漏磁检测原理,利用单片霍尔元件检测钢丝绳断丝漏磁的特性,推导出采用霍尔元件列沿钢丝绳周向均匀布置实现无漏检检测时元件的布置方法和最佳元件数计算式.根据钢丝绳结构特征,提出以提高检测信号信噪比和减少输出检测通道数为目的的多元件组合检测方法以及各元件间的最佳组合、布置方法.

关 键 词:钢丝绳  断丝  测量  霍尔元件  信号  信噪比

A Hall Effect Sensor for Leakage Flux Test of Broken Wires in Wire Ropes
Kang Yihua Yang Kechong Yang Shuzi Lu Wenxiang.A Hall Effect Sensor for Leakage Flux Test of Broken Wires in Wire Ropes[J].JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE,1992(Z1).
Authors:Kang Yihua Yang Kechong Yang Shuzi Lu Wenxiang
Institution:Kang Yihua Yang Kechong Yang Shuzi Lu Wenxiang
Abstract:Based on the principle of leakage flux test for broken wires in wire ropes, the characteristic parameters with single Hall element including the longitudinal resolution, the signal-to-noise ratio of testing signals and the formula for the optimum number of Hall elements are derived when the elements arrary is installed uniformly around the periphery. The combined test method with multiple elements for improving the signal-to-noise ratio of testing signals and reducing the number of output channels as well as the optimum combining the installing method of Hall elements is proposed.
Keywords:measurement  wire rope  broken wire  Hall element  signal  signal-to-noise ratio
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号