| 蓝牙程控微电极拉制仪的研制 |
| |
| 引用本文： | 刘向明,王威,李享元.蓝牙程控微电极拉制仪的研制[J].中南民族大学学报(自然科学版),2012,31(2):90-95. |
| |
| 作者姓名： | 刘向明 王威 李享元 |
| |
| 作者单位： | 1. 中南民族大学生物医学工程学院,武汉,430074
2. 中南民族大学电子信息工程学院,武汉,430074 |
| |
| 基金项目： | 国家自然科学基金资助项目(30973961) |
| |
| 摘 要： | 研制了一种基于蓝牙的二步式水平微电极拉制仪,给出了系统的机械结构和硬件电路设计方案.采用LabVIEW编写了拉制参数设置和拉制进度显示的PC软件界面,利用BlueCore4蓝牙模块实现了拉制过程中的数据无线传输、参数保存功能.测试结果显示：系统拉制出来的玻璃电极在外形、尖端形状以及电极阻抗都已达到膜片钳实验要求.该仪器操作简单,拉制参数设置和保存容易,一次拉制出两根对称电极,为电生理、膜片钳以及其它神经生物实验提供了一个可靠的工具.
|
| 关 键 词： | 微电极 拉制仪 膜片钳 蓝牙通信 虚拟仪器 |
Horizontal Microelectrode Puller Based on Bluetooth |
| |
| Liu Xiangming,Wang Wei,Li Xiangyuan.Horizontal Microelectrode Puller Based on Bluetooth[J].Journal of South-Central Univ for,2012,31(2):90-95. |
| |
| Authors: | Liu Xiangming Wang Wei Li Xiangyuan |
| |
| Institution: | 1 College of Biomedical Engineering,South-Central University for Nationalities,Wuhan 430074,China; 2 College of Electronic Information Engineering,South-Central University for Nationalities,Wuhan 430074,China) |
| |
| Abstract: | This paper presents a novel horizontal microelectrode puller based on Bluetooth technology,discusses the mechanical structure and hardware circuit for the micropipette puller,and the control software was developed by using LabVIEW platform.The software interface was dedicated to set the microelectrode parameters and indicate the pulling progress on PC.The BlueCore4 Bluetooth module transmitted the setting parameters to a microcontroller in the puller.The experiment results showed that the microelectrodes produced by the instrument were featured with good tip profile and low serial impedance for patch clamp experimental requirements.This puller is easy to operate and set pulling parameter,produce two symmetrical electrodes in each one progress.It’s a good tool for electrophysiology experiments. |
| |
| Keywords: | microelectrode microelectrode puller patch clamp bluetooth communication VI |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《中南民族大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《中南民族大学学报(自然科学版)》下载免费的PDF全文 |
|
