首页 | 本学科首页   官方微博 | 高级检索  
     检索      

双丝间接电弧氩弧焊的熔滴过渡形式
引用本文:曹梅青,邹增大,张顺善,曲仕尧.双丝间接电弧氩弧焊的熔滴过渡形式[J].山东科技大学学报(自然科学版),2011,30(4).
作者姓名:曹梅青  邹增大  张顺善  曲仕尧
作者单位:山东科技大学材料科学与工程学院,山东青岛266510 [2]山东大学材料科学与工程学院,山东济南250061
基金项目:山东省自然科学基金项目,山东科技大学科学研究“春蕾计划”项目
摘    要:采用氙灯背光高速摄像系统及示波器对双丝间接电弧氩气保护焊的熔滴过渡进行了研究。结果表明:双丝间接电弧氩弧焊正、负极的熔滴过渡形式并不完全相同,根据正、负极熔滴过渡形式的不同组合将熔滴过渡分为大滴—大滴过渡,射滴—大滴过渡,短路过渡,射滴—射滴过渡,射流—大滴过渡,射流—射滴过渡及射流过渡7种类型。在焊接过程中以射流过渡及射流—射滴过渡为主。双丝间接电弧氩弧焊主要靠电弧热量及熔滴携带热量熔化母材,熔滴过渡方向与电流流动方向不同,正、负两极熔滴同时过渡,两极的过渡频率、尺寸有所不同。

关 键 词:间接电弧  熔滴过渡  短路过渡  过渡形式

Mode of Metal Transfer on Twin-wire Indirect Arc Argon Welding
CAO Meiqing,ZOU Zengda,ZHANG ShunShan,QU Shiyao.Mode of Metal Transfer on Twin-wire Indirect Arc Argon Welding[J].Journal of Shandong Univ of Sci and Technol: Nat Sci,2011,30(4).
Authors:CAO Meiqing  ZOU Zengda  ZHANG ShunShan  QU Shiyao
Institution:CAO Meiqing1,ZOU Zengda2,ZHANG ShunShan2,QU Shiyao2 (1.College of Material Science and Engineering,Shandong University of Science and Technology,Qingdao,Shandong 266510,China,2.College of Material Science and Engineering,Shandong University,Jinan,Shandong 250061,China)
Abstract:The metal transfer of twin-wire indirect arc argon welding was investigated with high-speed camcorder system based on a xenon lamp source and digital oscillogragh.Results show that the metal transfer mode of anodal and cathodal does not mean completely th
Keywords:indirect arc  metal transfer  short circuiting transfer  transfer mode
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号