|
|||||
|
|
| 45#钢在含有微米级二硫化钼的18#齿轮油中的摩擦磨损性能 | |
| 引用本文： | 唐扬,刘利国,王泽宇,周洪梅,刘小华,丁诗泳. 45#钢在含有微米级二硫化钼的18#齿轮油中的摩擦磨损性能[J]. 江南学院学报, 2014, 0(1): 76-79 |
| 作者姓名： | 唐扬 刘利国 王泽宇 周洪梅 刘小华 丁诗泳 |
| 作者单位： | 江南大学机械工程学院,江苏无锡214122 |
| 摘 要： | 通过45#钢在二硫化钼质量分数分别为0％，0．5％，1％，1．5％，2％的18#齿轮油润滑的5种工况下，进行不同载荷的滑动摩擦试验，比较其摩擦磨损性能并分析磨损机制。结果表明，载荷为300N时，二硫化钼质量分数为2％的18#齿轮油中45#钢磨损量比其在基础油工况下降低了43．5％，摩擦系数降低了33．1％。二硫化钼质量分数为2％时18#齿轮油的抗摩擦磨损性能最好。 |
| 关 键 词： | 45#钢 18#齿轮油 二硫化钼 摩擦磨损 |
Study on the Friction and Wear Properties of 45# Steel in 18# Gear Oil Containing Micron Grade Molybdenum Disulfide in |
|
| TANG Yang,LIU Liguo,WANG Zeyu,ZHOU Hongmei,LIU Xiaohua,DING Shiyong. Study on the Friction and Wear Properties of 45# Steel in 18# Gear Oil Containing Micron Grade Molybdenum Disulfide in[J]. Journal of Jiangnan College, 2014, 0(1): 76-79 | |
| Authors: | TANG Yang LIU Liguo WANG Zeyu ZHOU Hongmei LIU Xiaohua DING Shiyong |
| Affiliation: | ( School of Mechanical Engineering, Jiangnan University, Wuxi 214122, China) |
| Abstract: | Through the 45# steel five conditions of 18# gear oil lubrication in molybdenum content 0% ,0.5%, 1%, 1.5% ,2% under the load change,sliding friction are compared and the friction and wear properties of wear mechanism is analyzed. The results show that,when the load is 300 N, MoS2 content for 45# wear volume is 43.5% lower than that of the base oil of lubricating oil 2% ,the friction coefficient decreases by 33.1%. In five cases,MoS2 content is 2% of the best friction and wear properties. |
| Keywords: | 45# steel 18# gear oil MoSz friction and wear |
| 本文献已被 维普 等数据库收录！ | |