首页 | 本学科首页   官方微博 | 高级检索  
     

轻型客车室内通风的数值模拟与实验研究
引用本文:陈江平,孙召璞,阙雄才,陈芝久. 轻型客车室内通风的数值模拟与实验研究[J]. 应用科学学报, 2002, 20(2): 169-172
作者姓名:陈江平  孙召璞  阙雄才  陈芝久
作者单位:上海交通大学制冷与低温工程研究所, 上海 200030
摘    要:根据轻型客车室内空气三维流动和传热的特点,将空调风道系统纳入计算区域,对车室内流场和温度场的分布进行了数值仿真,并利用环境模拟试验验证了数值方法的可靠性.理论与实验结果表明,客车风道内风量分配主要由风道内的静压分布决定.适当加大风道截面积有利于风量分配,并可避免采用变截面收缩风道而增加的工艺难度.

关 键 词:汽车空调  热微环境  计算传热  汽车通风  
文章编号:0255-8297(2002)02-0169-04
收稿时间:2000-12-06
修稿时间:2001-06-04

A Numerical and Experimental Study of the Ventilation of Light-duty Bus
CHEN Jiang ping,SUN Zhao pu,QUE Xiong cai,CHEN Zhi jiu. A Numerical and Experimental Study of the Ventilation of Light-duty Bus[J]. Journal of Applied Sciences, 2002, 20(2): 169-172
Authors:CHEN Jiang ping  SUN Zhao pu  QUE Xiong cai  CHEN Zhi jiu
Affiliation:Institute of Refrigeration Engineering, Shanghai Jiaotong University, shanghai 200030, China
Abstract:A 3 dimensional ventilation model of a light duty bus is established by taking the duct into account. The air velocity and temperature inside the passenger compartment are analyzed numerically and experimentally. Both results show that the cooled air flux of discharges are decided by the steady pressure distribution in duct interior. The uniformity of discharge air can be improved by enlarging the flow area of the duct or using the contractive duct. To simplify the technological process a new duct with 40% flow area enlarged are recommended for the vehicle under study.
Keywords:automotive air condition  numerical heat transfer  thermal micro climate  automotive ventilation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《应用科学学报》浏览原始摘要信息
点击此处可从《应用科学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号