| 端部圆锥形薄壁构件的抗撞性设计优化 |
| |
| 引用本文： | 侯淑娟,李青,龙述尧.端部圆锥形薄壁构件的抗撞性设计优化[J].湖南大学学报(自然科学版),2006,33(3):37-40. |
| |
| 作者姓名： | 侯淑娟 李青 龙述尧 |
| |
| 作者单位： | 1. 湖南大学,工程力学系,湖南,长沙,410082
2. 湖南大学现代车身技术国家重点实验室,湖南,长沙,410082;悉尼大学,航空、机械和机电一体化工程学院,悉尼 NSW 2006 澳大利亚 |
| |
| 基金项目： | 国家973资助项目(2004CB719402)，国家自然科学基金资助项目(10372029) |
| |
| 摘 要： | 基于显式有限元技术,采用响应面法,以结构的比吸能为优化函数,研究了圆形截面金属薄壁构件的端部锥形尺寸对抗撞性的影响;经过数值分析,得出了端部为锥形的圆形截面薄壁构件的比吸能关于锥形长度和锥边直径的变化规律,这些规律可以用于实际吸能原件的设计,并为进一步研究奠定了基础.
|
| 关 键 词： | 设计优化 有限元法 锥形薄壁构件 抗撞性 比吸能 |
| 文章编号： | 1000-2472（2006）03-0037-04 |
| 收稿时间： | 04 28 2005 12:00AM |
| 修稿时间： | 2005-04-28 |
The Crashworthiness Design Optimization of Thin-walled Component with Circular Tapered End |
| |
| HOU Shu-juan,LI Qing,LONG Shu-yao.The Crashworthiness Design Optimization of Thin-walled Component with Circular Tapered End[J].Journal of Hunan University(Naturnal Science),2006,33(3):37-40. |
| |
| Authors: | HOU Shu-juan LI Qing LONG Shu-yao |
| |
| Abstract: | This paper studied,the influence of the total length and shorter diameter of the tapered end of the circular cross-sectional metal thin-walled component on the crashworthiness,where the Specific Energy Absorption(SEA) was taken as the objective function by using the Response Surface Method(RSM) on the basis of the explicit Finite Element(FE) algorithm.The response surface of SEA with respect to the total length and shorter diameter of the tapered end of the circular cross-sectional thin-walled component was obtained through the numerical analysis,and the optimal design variables were also presented,which can be used to the optimal design of the practical energy-absorbing element. |
| |
| Keywords: | design optimization finite element method tapered thin-walled component crashworthiness specific energy absorption(SEA) |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《湖南大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《湖南大学学报(自然科学版)》下载免费的PDF全文 |
