首页 | 本学科首页   官方微博 | 高级检索  
     检索      

石家庄钢铁公司高炉内碱金属循环
引用本文:张勇,吕庆,李福民.石家庄钢铁公司高炉内碱金属循环[J].河北理工学院学报,2007,29(2):32-38.
作者姓名:张勇  吕庆  李福民
作者单位:河北理工大学冶金与能源学院 河北唐山063009
摘    要:石家庄钢铁公司高炉的碱金属(K_2O Na_2O)负荷较高,为5.25~5.5kg/tFe。其中由烧结矿带入的碱金属占碱金属负荷的70%左右,球团矿和焦炭各占碱金属负荷的10%左右,其它炉料带入量较少。石钢高炉总排碱率为73%~79%,其中炉渣排碱率为68%~77%,炉顶煤气排碱率为5%左右。石钢高炉蓄积率保持在0.227~0.282kg/Fe·h之间,高炉处于蓄积期,且蓄积率较高。所以,建议石钢高炉的碱金属负荷临界值选取4.0kg/tFe。

关 键 词:高炉  碱金属  碱平衡
文章编号:1007-2829(2007)02-0032-07
修稿时间:2006-05-18

Study on Alkali Metals Recycle in Blast Furnace of Shi Gang
ZHANG Yong, LUE Qing,LI Fu-min.Study on Alkali Metals Recycle in Blast Furnace of Shi Gang[J].Journal of Hebei Institute of Technology,2007,29(2):32-38.
Authors:ZHANG Yong  LUE Qing  LI Fu-min
Institution:College of Metallurgy and Energy,Hebei Polytechnic University,Tangshan Hebei 063009 ,China
Abstract:The alkali metals loads of ShiGang blast furnace were high,between 5.2 kg/tFe to 5.5kg/tFe.Among it, the alkali metals in the sinter was 69%,either pellet or coke was about 10%,other charges were litde.The total re- moving alkali rate of ShiGang BFs were 73% to 79%.Among it,removing alkali metals rate of slag is 68% to 77% and top gas is 5%.The accumulation rates of the alkail metals of ShiGang BFs were 0.22kg/tFe.h to 0.28kg/tFe. h and BFs were in accumulation age,Thus it suggested that ShiGang critical alkail metals load is 4.0kg/tFe.
Keywords:blast furnace  alkail metals  balance of alkali metals
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号