首页 | 本学科首页   官方微博 | 高级检索  
     

热处理工艺对Mg-RE-Zn-Zr系合金显微组织及力学性能的影响
引用本文:孟凡岩,鞠育平,杨洁,吴耀明,王立民. 热处理工艺对Mg-RE-Zn-Zr系合金显微组织及力学性能的影响[J]. 吉林工学院学报, 2008, 29(3): 245-249
作者姓名:孟凡岩  鞠育平  杨洁  吴耀明  王立民
作者单位:[1]长春工业大学材料科学与工程学院,吉林长春130012 [2]中国科学院长春应用化学研究所稀土资源利用国家重点实验室(筹),吉林长春130022
基金项目:中国科学院"百人计划"项目 , 长春市科技计划基金资助项目
摘    要:
通过气体保护制备了Mg-RE-Zn-Zr[RE-Ce-40La(wt%)的富铈稀土]合金,并对合金进行了热处理,测试了不同状态下合金的硬度、抗拉强度及伸长率等力学性能,采用光学显微镜、X射线衍射仪及扫描电镜对合金显微组织、拉伸断口进行了分析。结果发现,采用T6热处理工艺后,合金的晶粒尺寸明显细化,硬度、抗拉强度、屈服强度和伸长率显著提高,分别提高了11%,24%,7.3%和102%。

关 键 词:Mg—RE—Zn—Zr合金  T6热处理  显微组织  力学性能

The effect of heat treatment process on the microstructure and mechanical properties of Mg-RE-Zn-Zr alloy
Affiliation:MENG Fan-yan, JU Yu-ping , YANG Jie, WU Yao-ming, WANG Li-min (1. School of Materials Science & Engineering, Changchun University of Technology, Changchun 130012, China; 2. State Key Laboratory of Rare Earth Resource and Application(Under Construction), Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China)
Abstract:
Mg-RE-Zn-Zr alloy [RE= Ce-40La(wt%) rich cerium rare earth] is prepared under the gas protection,and is with heat treatment.The hardness,tensile strength and elongation,and other mechanical properties at different states are tested by means of optical microscopy,X-Ray diffraction and Scanning Electron Microscopy analysis.The structural feature and fracture behavior of the investigated alloys were revealed.The results showed that after T6 heat treatment,the grain size of the alloy is significantly refined an...
Keywords:Mg-RE-Zn-Zr alloy  T6 heat treatment  microstructure  mechanics performance.  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号