| 磨料流光整加工性研究 |
| |
| 引用本文： | 汤勇,周德明,杨钢,吴斌,张登友,李勇.磨料流光整加工性研究[J].华南理工大学学报(自然科学版),2001,29(9):17-19. |
| |
| 作者姓名： | 汤勇 周德明 杨钢 吴斌 张登友 李勇 |
| |
| 作者单位： | 华南理工大学机电工程系 |
| |
| 基金项目： | 国家自然科学基金资助项目 (970 5 0 16 )，广东省自然科学基金资助项目 (95 0 2 2 2 ) |
| |
| 摘 要： | 对磨料特性及其加工性进行了系统的研究，实验结果表明：在低速范围内，流动指数较小的磨料加工效果较好。磨料粘度及磨粒含量增加，均能提高加工效果，但流动性变差。磨粒粒度增大也可提高加工效果，其选择应取决于初始表面糙度值。
|
| 关 键 词： | 磨粒 流动性 粘度 磨料 加工性 含量 光整加工 |
| 文章编号： | 1000-565(2001)09-0017-03 |
Machinability of Abrasive Flowing Machining |
| |
| Tang Yong,Zhou De_ming,Yang Gang,Wu Bin,Zhang Deng_you,Li Yong.Machinability of Abrasive Flowing Machining[J].Journal of South China University of Technology(Natural Science Edition),2001,29(9):17-19. |
| |
| Authors: | Tang Yong Zhou De_ming Yang Gang Wu Bin Zhang Deng_you Li Yong |
| |
| Abstract: | The abrasive characteristics and machinability of abrasive flowing machining are systematically studied. The experimental results show that there is good machining effect to the small flow index of abrasive in the range of low tunnel average flow speed. With the increase of abrasive viscosity and the abrasive grain content, the machining effect gradually becomes better, but the flowablility worse. The increase of the abrasive grain size can make the machining effect become better, but the selection of the abrasive grain size depends on the orignal surface roughness. |
| |
| Keywords: | abrasive grain flowability viscosity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
