| 电站锅炉用耐热钢X10CrAl18板材的研制 |
| |
| 引用本文： | 都元学,王瑛玮,刘庆伟.电站锅炉用耐热钢X10CrAl18板材的研制[J].鞍山科技大学学报,2004,27(5):335-339. |
| |
| 作者姓名： | 都元学 王瑛玮 刘庆伟 |
| |
| 作者单位： | [1]鞍钢职工大学，辽宁鞍山114032 [2]抚顺特殊钢股份有限公司，抚顺113001 |
| |
| 摘 要： | 介绍采用电弧炉冶炼，加强脱氧操作，减少氧化铝夹杂，研制的X10CrAl18铁素钢体不锈钢，针对该钢晶粒易于粗化的特点，通过采取低温加工的方法，达到了细化晶粒的目的，得到了细晶组织．并通过采用合理的冷轧变形工艺，有效地控制了板材质量钢的塑性得到明显改善．
|
| 关 键 词： | 铁素体 低温加工 细化晶粒和板型控制 |
| 文章编号： | 1672-4410(2004)05-0335-05 |
| 修稿时间： | 2004年4月11日 |
Research on heat-resistant steel for X10CrAl18 plateused in boilers at power stations |
| |
| DU Yuan-xue,WANG Ying-wei,LIU Qing-wei.Research on heat-resistant steel for X10CrAl18 plateused in boilers at power stations[J].Journal of Anshan University of Science and Technology,2004,27(5):335-339. |
| |
| Authors: | DU Yuan-xue WANG Ying-wei LIU Qing-wei |
| |
| Institution: | DU Yuan-xue~1,WANG Ying-wei~2,LIU Qing-wei~2 |
| |
| Abstract: | This paper is about the research on X10CrAl18 ferric stainless steel. With the adoption of an electric arc furnace smelting, the application of strengehened deoxidation to decrease aluminum oxide inclusion is made,and the steel is obviously improved in quality.Owing to thickening of the steel's grain with ease,the low temperature process was employed to obtain finer grain.With the adoption of reasonable cold reduction process and effective control,the steel plate is controlled in quality and its plastics improved as well. |
| |
| Keywords: | ferric steel low temperature process refining grain size and control of steel plate dimensions |
| 本文献已被 CNKI 维普 等数据库收录！ |
