| 城轨列车转向架铝合金焊接枕梁的抗疲劳设计 |
| |
| 引用本文： | 刘志明,张冉,连青林.城轨列车转向架铝合金焊接枕梁的抗疲劳设计[J].北京交通大学学报(自然科学版),2017,41(1). |
| |
| 作者姓名： | 刘志明 张冉 连青林 |
| |
| 作者单位： | 北京交通大学机械与电子控制工程学院,北京,100044;中车青岛四方机车车辆股份有限公司国家工程研究中心,山东青岛,266111 |
| |
| 基金项目： | 国家科技支撑计划项目资助，铁道部科技发展项目资助(2014J004-A |
| |
| 摘 要： | 以城轨列车转向架铝合金枕梁为研究对象,基于Miner线性累积损伤理论和NASA小载荷S-N曲线延伸法,对枕梁主要焊缝进行了疲劳寿命评估.依据线路实测数据得到枕梁的载荷工况,设计了枕梁的疲劳试验方案.对没有通过疲劳试验的区域,采取了优化连接筋板厚度和减小应力集中等措施.结果表明铝合金枕梁新结构能够满足疲劳寿命要求.
|
| 关 键 词： | 转向架 铝合金 焊接枕梁 疲劳寿命 |
Anti-fatigue design of aluminum alloy welded bolster of urban rail train bogie |
| |
| LIU Zhiming,ZHANG Ran,LIAN Qinglin.Anti-fatigue design of aluminum alloy welded bolster of urban rail train bogie[J].JOURNAL OF BEIJING JIAOTONG UNIVERSITY,2017,41(1). |
| |
| Authors: | LIU Zhiming ZHANG Ran LIAN Qinglin |
| |
| Abstract: | It takes the aluminum alloy bolster of bogie as the study object in this paper.The fatigue life of main welds in bolster was evaluated based on Miner linear cumulative damage theory and NASA small load S-N curve extension method.Calculated work conditions were obtained from measured data in field tests,and fatigue test scheme for bolster was designed.Then measurements of optimizing the thickness of joint stiffeners and minimizing stress concentration were taken in areas that failed to pass the fatigue test.Finally it is verified that the new aluminum alloy bolster of bogie can meet the demand of fatigue life after improvement. |
| |
| Keywords: | bogie aluminum alloy welded bolster fatigue life |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
