| 基于虚拟样机的胶印机虚拟试验及串墨初始相位优化 |
| |
| 引用本文： | 李文威,陈南,殷国栋,解鹏程.基于虚拟样机的胶印机虚拟试验及串墨初始相位优化[J].东南大学学报(自然科学版),2011,41(1):101-106. |
| |
| 作者姓名： | 李文威 陈南 殷国栋 解鹏程 |
| |
| 作者单位： | 东南大学机械工程学院; |
| |
| 基金项目： | 江苏省科技成果转化专项资金资助项目(BT2007072) |
| |
| 摘 要： | 针对胶印机结构复杂的特点,提出基于虚拟试验获得胶印机整机性能数据的方法.以SolidWorks,COSMOS/Motion和ADAMS为虚拟样机建模平台,构建了某型胶印机印刷色组的虚拟样机模型.在ADAMS中对胶印机虚拟样机进行虚拟试验,获得了胶印机整机的静力学、运动学和动力学仿真数据.通过对虚拟试验数据的分析,明确了...
|
| 关 键 词： | 胶印机 虚拟样机 虚拟试验 串墨机构 优化 |
Virtual experiments and initial ink vibrating phase angle optimization of offset press based on virtual prototyping |
| |
| Li Wenwei,Chen Nan,Yin Guodong,Xie Pengcheng.Virtual experiments and initial ink vibrating phase angle optimization of offset press based on virtual prototyping[J].Journal of Southeast University(Natural Science Edition),2011,41(1):101-106. |
| |
| Authors: | Li Wenwei Chen Nan Yin Guodong Xie Pengcheng |
| |
| Institution: | Li Wenwei Chen Nan Yin Guodong Xie Pengcheng(School of Mechanical Engineering,Southeast University,Nanjing 211189,China) |
| |
| Abstract: | Taking the structural complexity of offset press into account,an approach of obtaining machine performance data by virtual experiments is presented.With SolidWorks,COSMOS/Motion and ADAMS as modeling platform,the virtual prototyping for individual printing unit of an offset press was constructed.The virtual experiments toward the virtual prototyping were performed in ADAMS,and the statics,kinematics and dynamics properties of the machine were obtained.Through the analysis of simulation results,the major sou... |
| |
| Keywords: | offset press virtual prototyping virtual experiments ink vibrating mechanism optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
