| 微细电火花加工脉冲电源及其脉冲控制技术 |
| |
| 引用本文： | 蒋毅,赵万生,顾琳,康小明.微细电火花加工脉冲电源及其脉冲控制技术[J].上海交通大学学报,2011,45(11):1684-1689. |
| |
| 作者姓名： | 蒋毅 赵万生 顾琳 康小明 |
| |
| 作者单位： | (上海交通大学 机械与动力工程学院， 机械系统与振动国家重点实验室， 上海 200240) |
| |
| 基金项目： | 国家自然科学基金资助项目(50635040); 国家高技术研究发展计划(863)项目(2009AA044205) |
| |
| 摘 要： | 为了提高微细电火花加工效率，通过分析微细电火花加工特点，改进了主放电回路，设计了一种基于现场可编程门阵列（FPGA）的微细电火花加工脉冲电源.该电源集成了放电状态检测功能，能够判断每一个脉冲的放电状态，并及时切断有害脉冲.设计了应用于微细电火花加工的清扫脉冲回路，可在极间加载高能量窄脉宽的清扫脉冲，以清除积聚在极间的加工屑.利用该电源在桌面式微细电火花加工机床上进行了微细深孔加工实验和微细孔极限加工实验，取得了较好的加工效果.
|
| 关 键 词： | 微细电火花加工 脉冲电源 清扫脉冲 深小孔 |
| 收稿时间： | 2011-02-28 |
Research on Pulse Generator and Pulse Control Technology for Micro Electrical Discharge Machining |
| |
| JIANG Yi,ZHAO Wan-sheng,GU Lin,KANG Xiao-ming.Research on Pulse Generator and Pulse Control Technology for Micro Electrical Discharge Machining[J].Journal of Shanghai Jiaotong University,2011,45(11):1684-1689. |
| |
| Authors: | JIANG Yi ZHAO Wan-sheng GU Lin KANG Xiao-ming |
| |
| Institution: | (School of Mechanical Engineering, State Key Laboratory of Mechanical Systems and Vibration, Shanghai Jiaotong University, Shanghai 200240, China) |
| |
| Abstract: | Aiming at improving the efficiency of micro electrical discharge machining(EDM),the characteristics of micro-EDM was analyzed,the main discharge circuit was improved,and a pulse generator for micro-EDM based on FPGA was developed.The function of gap status detection is integrated that every single pulse can be detected and the harmful discharge pulse can be cut off in time.A sweep pulse circuit was designed.The debris can be evacuated out of the discharge gap by the exploding effect of the sweep pulses,and ... |
| |
| Keywords: | micro electrical discharge machining pulse generator sweep pulse deep small hole |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海交通大学学报》浏览原始摘要信息 |
| 点击此处可从《上海交通大学学报》下载免费的PDF全文 |
