首页 | 本学科首页   官方微博 | 高级检索  
     

Swiss-roll燃烧器传热特性的模拟和试验研究
引用本文:扈鹏飞,林其钊. Swiss-roll燃烧器传热特性的模拟和试验研究[J]. 中国科学技术大学学报, 2011, 41(3). DOI: 10.3969/j.issn.0253-2778.2011.03.010
作者姓名:扈鹏飞  林其钊
作者单位:1. 中国科学技术大学热科学与能源工程系,安徽合肥,230027;沈阳发动机设计研究所,辽宁沈阳,110015
2. 中国科学技术大学热科学与能源工程系,安徽合肥,230027
基金项目:中国高技术研究发展(863)计划
摘    要:建立了用于处理煤矿通风瓦斯的Swiss-roll燃烧器的二维湍流热平衡模型,求解模型方程得到了换热通道的温度分布,分析了进口流速、通道尺寸、燃烧室直径对传热特性的影响,并通过试验验证模型的合理性.结果表明,在甲烷体积分数为1%时,反应区温度达1346 K;通道宽度对反应区温度的影响最大而进口流速的影响最小;改变进口流速和换热通道尺寸能改善燃烧器的部分性能同时又会不利于另一些性能,在燃烧器的设计中,应根据实际情况,综合考虑温度、流阻、成本等因素来选择合适的参数.

关 键 词:Swiss-roll燃烧器  矿井通风瓦斯  传热

Simulation and experimental study on heat transfer research of Swiss-roll combustor
HU Pengfei,LIN Qizhao. Simulation and experimental study on heat transfer research of Swiss-roll combustor[J]. Journal of University of Science and Technology of China, 2011, 41(3). DOI: 10.3969/j.issn.0253-2778.2011.03.010
Authors:HU Pengfei  LIN Qizhao
Affiliation:HU Pengfei1,2,LIN Qizhao1(1.Department of Thermal Science and Energy Engineering,University of Science and Technology of China,Hefei 230027,China,2.Shenyang Aeroengine Research Institute,Shenyang 110015,China)
Abstract:A thermal equilibrium model of Swiss-roll combustors(SRC) for ventilation air methane(VAM) combustion was developed.Temperature distributions of the combustors were calculated.The effects of inlet velocity,channel structure,diameter of heat transfer characteristics were investigated.Then an experiment was completed and the results can be used to validate the rationality of the proposed transfer model.It was found that even when the methane volume fraction of inlet VAM remained 1%,TCC(the reaction zone tempe...
Keywords:Swiss-roll combustor  VAM  heat transfer  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号