| 工艺润滑对铝板带冷轧表面粗糙度的影响 |
| |
| 引用本文： | 孙建林,孙艳伟,张英智,王刚,李戬.工艺润滑对铝板带冷轧表面粗糙度的影响[J].青海大学学报,2006,24(1):1-3,9. |
| |
| 作者姓名： | 孙建林 孙艳伟 张英智 王刚 李戬 |
| |
| 作者单位： | [1]北京科技大学材料科学与工程学院,北京100083 [2]青海大学,青海西宁810016 |
| |
| 摘 要： | 铝薄板冷轧工艺润滑中，为获得高质量铝板表面，可选择不同粘度的轧制油，进而控制变形区油膜厚度。轧制实验中选用粘度在1．68-2.13mm^2／s之间的三种轧制油，轧制厚度小于0.3mm的铝薄板，与无润滑轧制相比，可使轧后铝板表面质量得到明显改善，尤其是能使表面粗糙度降低40％左右。同时进一步分析了表面粗糙度降低的微观原因。
|
| 关 键 词： | 铝材 轧制油 润滑 表面粗糙度 |
| 文章编号： | 1006-8996（2006）01-0001-03 |
| 收稿时间： | 2005-11-05 |
| 修稿时间： | 2005-11-05 |
An influence of lubrication on surface roughness in cold rolling aluminum process |
| |
| SUN Jian-lin,SUN Yan-wei,ZHANG Ying-zhi,WANG Gang,LI Jian.An influence of lubrication on surface roughness in cold rolling aluminum process[J].Journal of Qinghai University(Natural Science),2006,24(1):1-3,9. |
| |
| Authors: | SUN Jian-lin SUN Yan-wei ZHANG Ying-zhi WANG Gang LI Jian |
| |
| Institution: | 1 .School of Materials Science and Engineering, USTB Beijing , Beijing 100083, China; 2. Qinghai University, Xining 810016, China |
| |
| Abstract: | In cold rolling aluminum plate process, in order to achieve high surface quality of sheet, different viscosities of rolling oil can be selected to control the thickness of oil sheet in deformation zone. The rolling experiment adopts three kinds of viscosity of oil varying from 1.68 mm^2/s to 2.13 mm^2/s to mill thin aluminum plates and the thickness is less than 0.3 mm. Compared with mUing aluminum plate without oil, the surface quality of oil - rolled aluminum sheet can be improved obviously. In addition, the surface roughness is reduced to more than 40%. At the same time, the reason of reducing surface roughness is analysed. |
| |
| Keywords: | aluminum roiling oil lubrication surface roughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
