| 高温合金GH3039铣削力实验研究 |
| |
| 引用本文： | 郭延艳,赵灿,王旭峰,何万涛.高温合金GH3039铣削力实验研究[J].黑龙江科技学院学报,2011,21(6):463-465. |
| |
| 作者姓名： | 郭延艳 赵灿 王旭峰 何万涛 |
| |
| 作者单位： | 1. 黑龙江科技学院工程训练与基础实验中心,哈尔滨,150027
2. 黑龙江科技学院现代制造工程中心,哈尔滨,150027 |
| |
| 基金项目： | 国家自然科学基金项目(51075128);国家科技重大专项项目(2010ZX04016-012) |
| |
| 摘 要： | 由于高温合金材料GH3039的切削加工性差,选取背吃刀量、铣削速度、每齿进给量等参数,研究其对高温合金数控铣削力的影响。利用线性回归方法建立了铣削力经验公式,并通过铣削实验得到了切削参数与铣削力的变化曲线。实证表明切削参数的选择在GH3039加工过程中的重要性。
|
| 关 键 词： | 高温合金 GH3039 铣削参数 铣削力 |
Experimental study on superalloy GH3039 milling force |
| |
| GUO Yanyan,ZHAO Can,WANG Xufeng,HE Wantao.Experimental study on superalloy GH3039 milling force[J].Journal of Heilongjiang Institute of Science and Technology,2011,21(6):463-465. |
| |
| Authors: | GUO Yanyan ZHAO Can WANG Xufeng HE Wantao |
| |
| Institution: | 1.Center for Engineering Training & Basic Experimentation,Heilongjiang Institute of Science & Technology,Harbin 150027,China;2.Morden Manufacture Engineering Center,Heilongjiang Institute ofScience & Technology,Harbin 150027,China) |
| |
| Abstract: | Aimed at improving the poor machining of superalloy GH3039,this paper identifies the effect of the axial depth,cutting speed and feed per tooth on the superalloy GH3039 milling force.The milling force experience formula is established by means of regression analysis.The experiment gives the curve of cutting parameters and milling force.The demonstration shows that the selection of cutting parameters is important in machining this kind of superalloy. |
| |
| Keywords: | superalloy GH3039 milling parameters cutting force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
