| 光固化成形中的智能涂层工艺 |
| |
| 引用本文： | 张定军,颜永年,张人佶,王青岗.光固化成形中的智能涂层工艺[J].上海交通大学学报,2006,40(2):211-214. |
| |
| 作者姓名： | 张定军 颜永年 张人佶 王青岗 |
| |
| 作者单位： | 清华大学,机械工程系,北京,100084 |
| |
| 摘 要： | 为提高涂层效率和保证涂层质量从而达到提高光固化成形效率的目的,对光固化涂层参数与涂层质量和涂层效率的关系进行了研究,得出了各参数对涂层质量和涂层效率的影响规律,提出了根据层片形状优化涂层参数的智能涂层工艺.工艺实验结果表明,对于截面变化较大的零件,采用智能涂层方式与普通涂层方式相比,平均涂层时间可以节约42%左右,同时成形件表面波度减少31%左右,有效地提高了涂层效率.
|
| 关 键 词： | 智能涂层 光固化 涂层效率 |
| 文章编号： | 1006-2467(2006)02-0211-04 |
| 收稿时间： | 2005-02-28 |
| 修稿时间： | 2005年2月28日 |
The Intelligent Recoating Process in Stereolithography |
| |
| ZHANG Ding-jun,YAN Yong-nian,ZHANG Ren-ji,WANG Qing-gang.The Intelligent Recoating Process in Stereolithography[J].Journal of Shanghai Jiaotong University,2006,40(2):211-214. |
| |
| Authors: | ZHANG Ding-jun YAN Yong-nian ZHANG Ren-ji WANG Qing-gang |
| |
| Institution: | Dept of Mechanical Eng , Tsinghua Univ , Beijing 100084, China |
| |
| Abstract: | In order to increase the speed of recoating and ensure the quality of recoating for improvement of the efficiency of stereolityography,this paper discussed the relation between parameters of recoating and recoating efficiency,obtained the rule of how recoating parameters to influence the quality and efficiency,and proposed the intelligent recoating method.The experiments prove that the intelligent method compared with normal recoating method can save about 42 percent recoating time and decrease about 31 percent surface wave. |
| |
| Keywords: | intelligent recoating stereolithography recoating efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
