| 武钢大型轧钢厂Φ860开坯机轧制I16七道次改五道次的可行性分析 |
| |
| 引用本文： | 黄宁,杭乃勤,余驰斌,赵刚,徐光,李承斌,钟爱华,邹大鹏,周禹成.武钢大型轧钢厂Φ860开坯机轧制I16七道次改五道次的可行性分析[J].武汉科技大学学报(自然科学版),1995(4). |
| |
| 作者姓名： | 黄宁 杭乃勤 余驰斌 赵刚 徐光 李承斌 钟爱华 邹大鹏 周禹成 |
| |
| 作者单位： | 武汉钢铁学院，武汉钢铁（集团）公司 |
| |
| 摘 要： | 作者通过对武钢大型轧钢厂８６０开坯机七道次轧制Ｉ１６及五道次轧制Ｉ１８的现场有参数的测试、计算及分析，提出了８６０开坯机五道次轧制Ｉ１６的孔型及压下规程的新方案．这对缩短８６０开坯机的轧制时间，简化操作，提高产量具有实用价值。
|
| 关 键 词： | 开坯机 轧制道次 孔型 压下规程 |
ANALYSIS OF THE FEASIBILITY TO SUBSTITUTE 5 PASSES FOR 7 PASSES IN ROLLING ON 860 COGGING MILL AT THE HEAVY STEEL ROLLING PLANT OF WUHAN IRON AND STEEL COMPANY |
| |
| Huang Ning, Hang Naiqin, Yu Chibin, Zhao Gang, Xu Guang, Li Chengbin, Zhong Aihua, Zou Dapeng, Zhou Yucheng.ANALYSIS OF THE FEASIBILITY TO SUBSTITUTE 5 PASSES FOR 7 PASSES IN ROLLING ON 860 COGGING MILL AT THE HEAVY STEEL ROLLING PLANT OF WUHAN IRON AND STEEL COMPANY[J].Journal of Wuhan University of Science and Technology(Natural Science Edition),1995(4). |
| |
| Authors: | Huang Ning Hang Naiqin Yu Chibin Zhao Gang Xu Guang Li Chengbin Zhong Aihua Zou Dapeng Zhou Yucheng |
| |
| Institution: | Huang Ning; Hang Naiqin; Yu Chibin; Zhao Gang; Xu Guang; Li Chengbin; Zhong Aihua; Zou Dapeng; Zhou Yucheng |
| |
| Abstract: | Through measure, calculation and analysis of the parameters as to rolling 116 through 7 passes and 5 passes respectively on a 860 cogging mill at'the Heavy Steel Rolling Plant of Wuhan iron and Steel Company, the authors present a plan to modification of the pass or groove pattern and screwdown specifications as to rolling 116 through 5 passes instead of 7 passes on the rt860 cogging mill.The plan has proved feasible to shorten the rolling time on the 2860 cogging mill,simplify the operation and raise the production. |
| |
| Keywords: | cogging mill rolling passes pass pattern screwdown specification |
| 本文献已被 CNKI 等数据库收录！ |
