| 铝基复合材料的钻削及攻丝加工试验 |
| |
| 引用本文： | 倪俊芳,韩荣第.铝基复合材料的钻削及攻丝加工试验[J].上海交通大学学报,1997,31(9):131-134. |
| |
| 作者姓名： | 倪俊芳 韩荣第 |
| |
| 作者单位： | [1]上海交通大学机械工程系 [2]哈尔滨工业大学机电学院 |
| |
| 摘 要： | 采用硬质合金、ＴｉＮ涂层、高速钢和深冷处理四种刀具材料对ＳｉＣｗ／ＬＤ２、ＳｉＣｐ／ＬＤ２铝基复合材料的小孔钻削性能进行研究。确认由于复合材料增强相的作用，使得其机械加工性能变得很差，其中刀具剧烈磨损和加工表面质量恶化是主要突出问题。
|
| 关 键 词： | 铝基复合材料 钻削 攻丝加工试验 加工质量 |
Drilling and Tapping of Reinforced Aluminum Composites |
| |
| Ni Junfang,Cai Jianguo.Drilling and Tapping of Reinforced Aluminum Composites[J].Journal of Shanghai Jiaotong University,1997,31(9):131-134. |
| |
| Authors: | Ni Junfang Cai Jianguo |
| |
| Abstract: | The drilling performance of SiC w/LD2,SiC p/LD2 reinforced aluminum composites is investigated.It is found that the form of tool wear is abrasive and the modified sintered carbide driller can do the excellent drilling when requirement for the quality of holes to be drilled is not very high. |
| |
| Keywords: | reinforced aluminum composites cutting force cutting temperature tool wear surface quality |
| 本文献已被 CNKI 维普 等数据库收录！ |
