首页 | 本学科首页   官方微博 | 高级检索  
     检索      

乙二胺磺甲基化产物络合性能的研究
引用本文:史俊,刘学,崔进,张海.乙二胺磺甲基化产物络合性能的研究[J].西安石油大学学报(自然科学版),2006,21(2):41-43.
作者姓名:史俊  刘学  崔进  张海
作者单位:西安石油大学,化学化工学院,陕西,西安,710065
摘    要:以乙二胺、甲醛、亚硫酸钠为原料合成了乙二胺四甲撑磺酸盐(EDTS),考虑了介质酸度、缓冲溶液用量、显色剂用量、显色温度等影响因素,利用分光光度法确定了EDTS与Cu2+形成络合物的最佳显色条件pH值为5.0~5.8的Hac-NaAc缓冲溶液1.50mL与6.0mLEDTS混合在80℃水浴加热15min得到的显色效果较好.用摩尔比法准确测定出EDTS对Cu2+的络合配比为2∶1,形成的络合物最大吸收波长在590nm处.

关 键 词:乙二胺  磺甲基化  物质的量比法  络合物
文章编号:1673-064X(2006)02-0041-03
修稿时间:2005年12月10

Research on complexing performance of the product of ethylenediamine sulphomethylation
SHI Jun,LIU Xue,CUI Jin,ZHANG Hai.Research on complexing performance of the product of ethylenediamine sulphomethylation[J].Journal of Xian Shiyou University,2006,21(2):41-43.
Authors:SHI Jun  LIU Xue  CUI Jin  ZHANG Hai
Abstract:Ethylenediamine–tetramethyl-sulfonate is synthesized from sodium sulfite, formaldehyde and ethylenediamine. The influences of medium acidity, the dose of buffer solution, the dose of developer and color development temperature on the color-development property of the product are studied, and the optimal color-development conditions in using EDTS and Cu 2+ forming complex are determined using spectrophotometry. It is shown that, the color development result of the complex is better when Hac-NaAc buffer solution of 1.50 mL and EDTS of 6.0 mL are mixed and are heated 15 min in the water bath of 80 ℃. The complexing ratio of EDTS to Cu 2+ is measured by mole ratio method and it is 2∶1. The maximum absorbing wave-length of the formed complex is at 590 nm.
Keywords:ethylenediamine  sulfomethylation  mole ratio method  complex
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号