| 单板旋切工艺最优化的研究 |
| |
| 引用本文： | 陈自建 王建和. 单板旋切工艺最优化的研究[J]. 南京林业大学学报(自然科学版), 1989, 13(1): 64-72 |
| |
| 作者姓名： | 陈自建 王建和 |
| |
| 作者单位： | 南京林业大学(陈自建，王建和，朱克敬)，南京林业大学(华毓坤) |
| |
| 摘 要： | 单板质量直接影响胶合板质量,而单板旋切工艺条件是决定单板质量的主要因素之一。本文在单板旋切工艺最优化方面进行了研究得出椴木两种单板厚度的最佳工艺条件。
|
| 关 键 词： | 旋切工艺 优化方法 椴木 |
RESEARCH ON THE OPTIMUM METHODS OF THE VENEER ROTATORY-CUTTING PROCESS |
| |
| Chen ZiJian Wang Jianhe Zhu Kejing Hua Yukun. RESEARCH ON THE OPTIMUM METHODS OF THE VENEER ROTATORY-CUTTING PROCESS[J]. Journal of Nanjing Forestry University(Natural Sciences ), 1989, 13(1): 64-72 |
| |
| Authors: | Chen ZiJian Wang Jianhe Zhu Kejing Hua Yukun |
| |
| Affiliation: | Nanjing Forestry University |
| |
| Abstract: | Plywood qualities are directly affected by the veneer qualities. The condition of veneer rotatory-cutting process is an important factor to decide the veneer qualities. This article has made scientific researches on the optimum of process for veneer rotatory-cutting, and obtained the optimum technologies for two kinds of veneer thickness of linden. |
| |
| Keywords: | Rotatory-cutting process Optimum methods Linden |
| 本文献已被 CNKI 维普 等数据库收录！ |
