循环作用对马蹄寺石窟群岩体性能的影响

马蹄寺石窟群地处河西走廊中部,气候条件十分恶劣。由于常年受到温度、湿度、酸碱盐等作用的影响,石窟岩体性能出现了不同程度的劣化现象。通过开展室内模拟试验,研究以上多种恶劣环境的循环作用对于岩体抗压强度、波速、质量的影响规律,同时使用X射线衍射仪(X-ray diffraction,XRD)、X射线荧光光谱(X-ray fluorescence,XRF)和扫描电子显微镜(scanning electron microscope,SEM)对循环作用过程中样品的矿物组分、元素含量和微观形貌进行分析研究。研究结果表明,循环作用使样品中的长石类矿物和方解石含量降低,黏土类矿物含量增加,胶结程度下降,孔隙逐渐发展成为横向微裂隙,导致样品的性能出现不同程度的劣化现象。循环作用对岩体性能的影响程度从大到小依次为冻融循环、耐盐循环、耐碱循环、耐酸循环和温湿循环。     

基于修正斜压场的RC框架边节点剪切性能分析

为研究钢筋屈服强度和混凝土抗压强度对钢筋混凝土(RC)框架边节点剪切性能的影响规律,基于修正斜压场理论(MCFT),对某框架边节点的剪切应力-应变骨架曲线进行数值模拟,并与试验结果进行对比.在验证MCFT算法的精度后,研究钢筋屈服强度和混凝土抗压强度两个参数变化对RC框架边节点剪切应力-应变骨架曲线和峰值剪切应力的影响规律.结果表明:基于MCFT可以较好地模拟RC框架边节点的剪切应力-应变关系曲线; RC框架边节点的峰值剪切应力对混凝土抗压强度的变化更为敏感,但当试件的钢筋(HRB400)屈服应力下降幅度超过16.45%时,对钢筋屈服应力的变化更为敏感;当试件的钢筋(HRB400)屈服应力下降幅度超过10%时,节点发生钢筋滑移破坏,此时峰值剪切应力会大幅下降.     

基于联合违约概率的资产组合投资优化方法

投资组合的资产联合违约概率(joint,probability of default,JPoD)是一种有效的系统风险测度工具.基于JPoD分析,提出了一种新的资产组合选择优化方法,即通过计算资产池中每两种资产的JPoD值得到JPoD矩阵,利用遍历算法逐次筛选,得出具有最小系统风险的多资产组合.实证分析首先利用2014 2015年的上证综指和深证成指数据验证了JPoD方法的有效性;其次,分别利用中国股票市场数据和美国股票市场数据将所提出的资产组合选择方法与马科维茨均值-方差组合理论、随机组合方法进行比较,结果表明无论是在中国股票市场还是美国股票市场,JPoD方法都明显优于其他两种方法.     

多元有序地质数据的最优分割法在工程中的应用

采用数学地质理论中的多元有序地质数据的最优分割方法对工程场地松散岩土层亚层进行了划分。实践证明 ,在土样物理力学性能评价指标选取合理的前提下 ,该方法简单方便 ,行之有效 ,可作为一种辅助手段帮助地质人员开展对土层的详细研究     

Developmental modes of the Neoproterozoic-Lower Paleozoic marine hydrocarbon source rocks in China

Based on the researches on rock type, the mode of occurrence, diagnostic minerals and creatures, the sedimentary geochemistry and organic facies of Chinese marine source rocks from wells and outcrops, and on the research findings of developmental modes of foreign marine source rock, the authors consider that it is impossible to objectively make clear the formation mechanism of hydrocarbon source rock with high organic matter abundance by either single mode of preservation or high organic matter productivity. According to the Chinese geological features, the formation mechanism of the Neoproterozoic-Lower Paleozoic marine source rock is generalized into four modes, namely, thermal water activity-upwelling flow-anoxic; carbonate gentle slope-upwelling flow; xerothermic climate-brine euxinic milieu; and humid climate-retained euxinic milieu; as the Lower Cambrian undercompensation basin organic facies （the Tarim Basin, South China and southwestern margin of North China）, carbonate gentle lime mud bound organic facies （the Upper Ordovician in Tazhong region of the Tarim Basin and the Lower Silurian in the Upper Yangtze Platform）, the Middle Cambrian evaporation laggon organic facies （the Tarim Basin and the Upper Yangtze Platform）, enclosed undercompensation terrigenous bay organic facies （the Middle-Upper Ordovician in the west of the Tarim Basin, the Lower Silurian Long- maxi Formation in the Upper Yangtze platform）. Chinese marine sedimentations with lower organic matter abundance are generalized into two modes of consumption-dilution mode of open epicontinental sea and depletion-dilution mode of supercompensation basin.     

The controlling factors and distribution prediction of H2S formation in marine carbonate gas reservoir, China

Generally, there are some anhydrites in carbonate reservoir, as H2S is also familiar in carbonate oil and gas reservoirs. Nowadays, natural gas with high H2S concentration is usually considered as TSR origin, so there is close relationship between H2S and anhydrite. On the contrary, some carbonate rocks with anhydrite do not contain H2S. Recently, researches show that H2S is only a necessary condition of H2S formation. The reservoir porosity, sulfate ion content within formation water, reservoir temperature, oil/gas and water interface, hydrocarbon and some elements of reservoir rock have great controlling effects on the TSR occurrence. TSR deoxidizes hydrocarbon into the acidic gas such as H2S and CO2, and the H2S formation is controlled by TSR occurrence, so the relationship among reaction room, the contact chance of sulfate ion and hydrocarbon, the reservoir temperature has great influence on the TSR reaction. H2S has relatively active chemical quality, so it is still controlled by the content of heavy metal ion. Good conditions of TSR reaction and H2S preservation are the prerequisite of H2S distribu- tion prediction. This paper builds a predictive model based on the characteristic of natural gas reservoir with high H2S-bearing. In the porosity reservoir with anhydrite, the formation water is rich in sulfate and poor in heavy metal ion. Oil and gas fill and accumulate in the gas reservoir with good preservation conditions, and they suffered high temperature later, which indicates the profitable area of natural gas with high H2S-bearing.     

改性沥青防水卷材的地下室施工

介绍新型防水材料ＳＢＳ改性沥青柔性油毡的性能、施工工艺、操作方法及保证质量的措施，并提出存在的问题及施工中注意事项。     

管节点疲劳裂纹扩展规律和寿命估算

对Ｔ型管节点的疲劳试验进行分析，研究疲劳裂纹的扩展规律，用“柔度法”计算应力强度因子范围ΔＫ，确定材料常数ｃ，ｍ，提出并运用“直线－曲线模式法”估算管节点疲劳寿命，结果与试验吻合，具有一定的实用参考价值。     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

桥头跳车的成因及处理方法

桥头跳车会增加行车风险并且会大大增加每年的养护费用．本文作者根据多年的养护管理及施工经验，对桥头跳车的成因从设计、施工及运营使用几方面进行了分析并提出了几种处理方法，尤其是对桥头搭板和土工格栅网两种目前工程界常用方法从设计机理到施工实践进行了比较详细的论述，同时对设计机理方面引入了相应的数学模型．