循环作用对马蹄寺石窟群岩体性能的影响

马蹄寺石窟群地处河西走廊中部,气候条件十分恶劣。由于常年受到温度、湿度、酸碱盐等作用的影响,石窟岩体性能出现了不同程度的劣化现象。通过开展室内模拟试验,研究以上多种恶劣环境的循环作用对于岩体抗压强度、波速、质量的影响规律,同时使用X射线衍射仪(X-ray diffraction,XRD)、X射线荧光光谱(X-ray fluorescence,XRF)和扫描电子显微镜(scanning electron microscope,SEM)对循环作用过程中样品的矿物组分、元素含量和微观形貌进行分析研究。研究结果表明,循环作用使样品中的长石类矿物和方解石含量降低,黏土类矿物含量增加,胶结程度下降,孔隙逐渐发展成为横向微裂隙,导致样品的性能出现不同程度的劣化现象。循环作用对岩体性能的影响程度从大到小依次为冻融循环、耐盐循环、耐碱循环、耐酸循环和温湿循环。     

基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

塔东热液地质作用机制及对储层的改造意义

塔东地区断裂发育，早期发育的断裂与晚期断裂之间存在相互改造、叠加、复合的过程，深大断裂沟通多套地层，断裂活动期形成的挤压破碎带和断裂裂缝带作为岩浆热液上升通道，为热液溶蚀作用改造储层提供了有利条件，因此，识别出热液期次对塔东白云岩储层成因机制具有重要意义。通过对钻井岩芯、岩屑及岩石薄片、铸体薄片观察鉴定分析，在区内下古生界碳酸盐岩中识别和发现了钠长石化作用和自生羽毛状伊利石沉淀，也是塔里木盆地内的首次发现，并通过对包裹体均一温度，碳氧同位素等地化特征研究，揭示其成岩流体源于岩浆热液，丰富了区内热液作用的矿物学标志，进一步识别出区内存在3期热液作用，通过对3期热液作用的机制及其储渗空间意义的研究，总结出第I期热液作用对于储层形成意义不大，第Ⅱ期热液作用主要发育在局限的沉积环境，第Ⅲ期热液溶蚀形成溶蚀缝孔洞，与天然气运移聚集匹配良好，构成了区内天然气聚集成藏的主要储渗空间。     

多元有序地质数据的最优分割法在工程中的应用

采用数学地质理论中的多元有序地质数据的最优分割方法对工程场地松散岩土层亚层进行了划分。实践证明 ,在土样物理力学性能评价指标选取合理的前提下 ,该方法简单方便 ,行之有效 ,可作为一种辅助手段帮助地质人员开展对土层的详细研究     

Developmental modes of the Neoproterozoic-Lower Paleozoic marine hydrocarbon source rocks in China

Based on the researches on rock type, the mode of occurrence, diagnostic minerals and creatures, the sedimentary geochemistry and organic facies of Chinese marine source rocks from wells and outcrops, and on the research findings of developmental modes of foreign marine source rock, the authors consider that it is impossible to objectively make clear the formation mechanism of hydrocarbon source rock with high organic matter abundance by either single mode of preservation or high organic matter productivity. According to the Chinese geological features, the formation mechanism of the Neoproterozoic-Lower Paleozoic marine source rock is generalized into four modes, namely, thermal water activity-upwelling flow-anoxic; carbonate gentle slope-upwelling flow; xerothermic climate-brine euxinic milieu; and humid climate-retained euxinic milieu; as the Lower Cambrian undercompensation basin organic facies （the Tarim Basin, South China and southwestern margin of North China）, carbonate gentle lime mud bound organic facies （the Upper Ordovician in Tazhong region of the Tarim Basin and the Lower Silurian in the Upper Yangtze Platform）, the Middle Cambrian evaporation laggon organic facies （the Tarim Basin and the Upper Yangtze Platform）, enclosed undercompensation terrigenous bay organic facies （the Middle-Upper Ordovician in the west of the Tarim Basin, the Lower Silurian Long- maxi Formation in the Upper Yangtze platform）. Chinese marine sedimentations with lower organic matter abundance are generalized into two modes of consumption-dilution mode of open epicontinental sea and depletion-dilution mode of supercompensation basin.     

The controlling factors and distribution prediction of H2S formation in marine carbonate gas reservoir, China

Generally, there are some anhydrites in carbonate reservoir, as H2S is also familiar in carbonate oil and gas reservoirs. Nowadays, natural gas with high H2S concentration is usually considered as TSR origin, so there is close relationship between H2S and anhydrite. On the contrary, some carbonate rocks with anhydrite do not contain H2S. Recently, researches show that H2S is only a necessary condition of H2S formation. The reservoir porosity, sulfate ion content within formation water, reservoir temperature, oil/gas and water interface, hydrocarbon and some elements of reservoir rock have great controlling effects on the TSR occurrence. TSR deoxidizes hydrocarbon into the acidic gas such as H2S and CO2, and the H2S formation is controlled by TSR occurrence, so the relationship among reaction room, the contact chance of sulfate ion and hydrocarbon, the reservoir temperature has great influence on the TSR reaction. H2S has relatively active chemical quality, so it is still controlled by the content of heavy metal ion. Good conditions of TSR reaction and H2S preservation are the prerequisite of H2S distribu- tion prediction. This paper builds a predictive model based on the characteristic of natural gas reservoir with high H2S-bearing. In the porosity reservoir with anhydrite, the formation water is rich in sulfate and poor in heavy metal ion. Oil and gas fill and accumulate in the gas reservoir with good preservation conditions, and they suffered high temperature later, which indicates the profitable area of natural gas with high H2S-bearing.     

硼对12Ni3CrMoV高强度钢焊接接头冷裂敏感性的影响

低碳调质高强度钢中添加硼对焊接冷裂敏感性的影响较少有人研究,并存在两种不同意见.本文对含硼量分别为0.005%,0.0014%,0.0028%,0.0035%的12Ni3CrMoV调质高强度钢焊接冷裂敏感性进行研究.试验结果表明:1.插销试验临界应力:含硼钢比无硼钢(含硼0.0005%)高;含硼钢中,临界应力按含硼量0.0014%,0.0028%,0.0035%的顺序递减.2.扫描电镜断口分析:无硼钢有沿晶断裂区、准介理断裂区和韧窝断裂区.含硼钢没有沿晶断裂区,只有准介理断裂区和韧窝断裂区.3.焊条未烘干时,无硼和含硼钢的插销临界应力都降低,无硼钢沿晶断裂区扩大,含硼钢仍无沿晶断裂区.4.硼在HAZ粗晶区中沿奥氏体晶界形成偏聚带,硼相主要沿奥氏体晶界呈不连续点状析出.含硼愈多,沿奥氏体晶界偏聚和硼相析出也愈多.5.C.D.Beachem提出的断口形貌发展过程示意图可以解释无硼钢断裂,不能完全解释含硼钢断裂过程.6.裂纹敏感性成分Pcm值表达式中,硼项系数为" 5"值得商榷.就本文钢材而言,硼项函数应为"负变数".本文对含硼钢延迟裂纹机理作了探讨.     

用多剖面法测试焊接接头的断裂韧性

本文用试验测定和理论计算表明,在多剖面法中利用复合试样测定焊接接头断裂韧性时,可测到的HAZ小区与板厚、试样厚度、线能量、预热温度及坡口角度等因素有关,并非总能测出全部小区的δ_(is)值.对提高测试精度的有关技术问题进行了探讨.     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.