炭黑／结晶性含氟树脂合金在自控温加热电缆中应用

选择了结晶性含氟树脂添加改性剂为树脂基体，与炭黑制居复合导电体系。通过这个对体系不同条件下ＰＴＣ特性的研究，对其配方与加工工艺进行优化。并利用扫描电镜，Ｘ射线衍射，ＤＳＣ等分析测试手段，对体系的各种开矿结构进行了研究，阐明了该导电复合体系的形态结构与性能的关系。     

离子交换树脂非均相催化酯化合成丙烯酸丁酯

研究了在间歇搅拌釜中以阳离子交换树脂为催化剂，由丙烯酸和丁醇合成丙烯酸丁酯。分别考察了不同类型离子交换树脂的催化酯化作用，并且研究了搅拌速度、催化剂用量以及反应温度对酯化反应的影响。研究结果表明以KNC9型离子交换树脂在373.15-393.15K温度下具有最好的催化酯化作用。     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

在Triton X—100存在下,用2-(5-溴-2-吡啶偶氮)-5-二乙胺基苯酚(5-Br-PADAP)分光光度测定方钍石中的钍

方钍石是钍来源的重要含钍矿物。目前测定钍的含量的方法较多,虽有用5-Br-PADAP测定钍的方法的报导,但未见有在triton X-100存在下,用5-Br-PADAP直接测定方钍石中钍的含量的报导。Triton X-100的存在,使测定的酸度增加,从而增加干扰元素的干扰比;并且增加了络合物的稳定时间。本文采用5-Br-PADAP作显色剂,在氯乙酸-氯乙酸钠缓冲体系中用triton X-100表面活性剂胶束增溶分光光度测定方钍石(人工样品)中钍的含量,获得较满意的结果。在25毫升中,钍的比耳定律范围在0～20微克,摩尔吸光系数为5.2×10~4升·摩尔~(-1)·厘米~(-1),Sandell灵敏度为0.0045微克钍(IV)/厘米~2。我们对两种含量的方钍石人工样品进行了测试,结果良好,回收率在97.3～101.4％之间,此方法可靠,精密度较高,误差符合微量组分的测定要求,我们对样品测定结果表示满意。     

吸附树脂对对甲苯胺的静态吸附行为及其热力学性质的研究

对比 Amberlite XAD-4与两种新型吸附树脂 NK和新 H对对甲苯胺的静态吸附行为 ,根据吸附等温线研究并讨论吸附热力学性质 .两种新型吸附树脂对对甲苯胺的吸附能力明显强于 Amberlite XAD-4 ,微孔作用机制及表面部分极性起决定作用 .吸附焓变 ΔH<0表明吸附为放热过程 ,降低温度有利于吸附 .对吸附焓变和自由能变的讨论同时表明树脂对对甲苯胺的吸附为多层物理吸附过程 .吸附熵变 ΔS表明吸附树脂表面的不均匀性和吸附质分子在树脂表面的分布及其局域运动与吸附有密切关系 .     

袋装砂井施工工艺及质量控制

介绍了广肇高速公路1-B标段软基处理中的袋装砂井施工工艺与工程质量控制,并列出了部份监测结果.     

Analysis of Pyrolysates for Phenol Formaldehyde Resin by Py-GC/MS

Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Several compounds, especially benzene, toluene, p-xylene could only be formed above 500-550℃. Howerver, peak intensities for some pbend derivatives were decreased at the higher temperature. During pyrolysis, for thermo-setting phenol formaldehyde resins, polymeric chain scissions take place as a successive removal of the monomer units from the polymeric chain. The chain scissions are followed by secondary reactions, which leads to a variety of compounds. Addition reactions can also take place among the double-bond compounds during pyrolysis.     

纳米CaCO3/丙烯酸树脂浆液的流变性

制备了纳米CaCO3/丙烯酸树脂浆液,当浆液(48 gZ-26、50g纳米CaCO3和83.3 g二甲苯)中分散剂添加量为3 g时,Casson屈服应力τc值最小,浆液的稳定性最好,与工艺条件优化时所得到的一致.纳米CaCO3/丙烯酸树脂浆液的流变性研究表明:该体系的流动特性符合Casson模型,其屈服应力τC较小,稳定性较好;浆液的黏度随剪切速率增加而显著下降,具有明显的剪切稀化特性,且随着纳米CaCO3含量增加,其剪切稀化趋势增强;在所考察的低剪切速率范围内,纳米CaCO3浆液具有明显的触变性,且纳米CaCO3含量越大触变性越大.图10,表7,参8.     

PRELIMINARY STUDY ON RETRO-REFLECTIVE COATED PAPER BASED ON MICROGLASS BEADS

INTRODUCTIONThe micro-glass bead[1-2] is a new kind of silicate material, with good properties of chemical stability, mechanical strength as well as electro-resistance. When its diameter is below 0.08mm and the reflective index is in the range of 1.9~2.1, retro-reflective characteristics can be achieved. When a beam of ray from any direction irradiates the surface of the micro-glass beads, it can be converged at the special reflective layer consisted of focuses of micro-glass beads, owing …