Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

一种新的代理缓存替换算法

使用文档大小、访问频率、文档访问剩余寿命作为计算文档价值的关键词，在提出的替换策略上，对文档的访问频率作一个更精确的计算。实验结果将会表明该算法的改进更进一步提高了缓存性能，得到较高的文档命中率和文档字节命中率。     

壳模型分子动力学优化新方法

提出了新的壳模型分子动力学优化方法来对壳位置进行优化.该方法的基本思想是利用多次迭代来确定模拟过程中壳的位置.分子动力学模拟的结果表明,该方法不但能够准确得到壳位置,计算效率比传统的优化方法要高,而且通过选择收敛因子还可以进一步控制计算精度和效率.该方法特别适合于对铁电材料的壳模型分子动力学模拟.     

SAP中WITS层数据完整性的实现

在WAP的WITS层中，通过HASH函数实现的消息验证码可以保证数据传输时的完整性，这样 可以有效地防止数据在传输过程中被主动攻击者修改，也可以防止数据被重放攻击和拒绝服务攻击。叙述 了HMAC中SHA-1及MD5算法的实现，重点分析了这2种算法各自的优越性。     

MD5加密算法在Web程序中的应用

MD5报程序中的相关应用,并在研究了现存算法对数据加密的缺点的基础上,提出了一种用MD5算法加密口令的改进方案.     

双重耗能智能框架摇摆墙结构地震响应对比分析

针对框架剪力墙结构在强震作用下存在连接处楼板或连梁破坏以及剪力墙底部出现塑性铰的问题,在课题组开发的智能框架剪力墙双重结构体系中,将剪力墙设置为底部连接金属阻尼器的摇摆剪力墙,形成一种新型双重耗能单元控制的智能框架摇摆墙结构体系.以6层混凝土框架剪力墙结构为原型,应用ABAQUS有限元分析软件,建立传统框架剪力墙结构、智能框架剪力墙双重结构、摇摆墙与框架间连接BRB结构和摇摆墙底部连接金属阻尼器的双重耗能智能框架摇摆墙4种结构对比模型,进行非线性动力时程分析,考察各结构的动力响应.结果表明:新型双重耗能单元控制的智能框架摇摆墙结构体系在BRB屈服强度为0.1f_y~1f_y区间时,结构地震响应均比传统结构有所减小,框架结构层间位移也得到有效控制,进一步说明在合理参数取值下双重耗能单元控制的结构地震动响应小于单一耗能单元结构.     

基于Web的绍兴机电网的规划与设计

本文利用WEB技术与数据库技术，对绍兴机电网进行规划与设计，同时对网站设计中关键技术的解决提供了思路。     

完整轮数的SHA－1差分路径寻找算法研究

基于LFSR消息编排的Hash函数目前应用广泛,典型的例子就是SHA－1．SHA－1是由美国国家标准技术研究所在1995年发布的Hash函数标准,该算法采用了Merkle－Damagard结构．笔者研究了王小云对SHA－1的攻击思想,详细分析了该攻击思想的原理、方法和实现思路,对其进行了改进和补充,给出了较多的候选干扰向量,为基于线性反馈移位寄存器进行消息编排的Hash函数的碰撞攻击提供了科学的理论依据．     

Finite element models and molecular dynamic simulations for studying the response of mast cell under mechanical activation

In micropipette aspiration experiment, increasing mechanical stress applied to cell membrane induced degranulation of mast cell as well as a current that could be inhibited by an inhibitor, which is specific for the transient receptor potential vanilloid （TRPVs） channels. To determine the sensitivity of TRPVs to membrane strain and tension, and to gain new insights into the activation mechanism of TRPVs, finite element models of mast cell and molecular dynamic simulations of human aquaporin-1 are presented. During the finite element simulations, the cell membrane sustained to micropipette aspiration was simulated, and the strain distribution along membrane thickness direction was obtained. Besides, combining the finite element models of osteoblast aspirated into micro- pipette and other compared models, we examined the relationship between cell mechanical stimulations and mechanical attributes and presented a new perspective to determine the cell equivalent elastic modulus. Consid- ering the indetermination of TRPV crystal structure, human aquaporin-1, one kind of the channel membrane proteins, substituting for TRPV, has been studied with molecular dynamic （MD） simulations, under different external lateral tensions which have been obtained in mast cell finite ele- ment simulations, to investigate the mechanical stimulation effects on the membrane channels. The simulations show that human aquaporin-1 undergoes significant conforma- tional change and expands in accordance with lateraltension, which not only confirms the tendency of the pre- vious electrophysiological experiments but also leads us to a better understanding of TRPVs. The multi-scale study combining finite element simulation and MD simulation is a significant breakthrough in the field of mechanical mechanism in cell system.     

温度对石墨烯条带拉伸力学性能影响的模拟研究

利用分子动力学模拟,分析了单层石墨烯条带在热力学温度[1K,800K]范围内拉伸力学性能对条带手性,宽度及模拟温度的依赖性.结果表明,相同条件下锯齿型石墨烯条带较扶手椅型石墨烯条带具有更大的弹性模量及拉伸强度;条带宽度的增加对弹性模量有较小影响,但拉伸强度随宽度的增加有明显变化;石墨烯条带拉伸强度随温度的升高而减小,均匀变温模拟条件下拉伸强度较室温恒温模拟结果有所变化,且温度变化率是影响拉伸强度的因之一.