Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

桅杆结构数据采集软件

文章介绍了桅杆结构数据采集软件的编制 ,并基于HY -8021多功能数据采集板与光电位置传感器的特性 ,使得该软件可满足以低频振动为主的建筑工程结构数据采集的要求。     

对摩擦力作功与摩擦生热的量度的认识

本文通过对摩擦力作功与不擦生热的讨论，给出摩擦生热的量度方法．     

一种定量敏感性问题的调查方法及其估计

讨论了定量敏感性问题的一种调查方法，在Eichhorn·Hayre的随机化调查模型的基础上，提出了一种更为可行的模型设计，并通过效率比较证明该模型比Hayre的随机化调查模型精度更高；最后利用比例估计，得出定量敏感变量高于（或低于）某一值α的调查者在总体中所占的比例．     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

试论综合材质在现代陶艺中的运用

陶瓷艺术已由传统的艺术程式进入了现代艺术表现阶段.在陶瓷艺术中,材质既是一种物质材料,又是重要的艺术表现手段.文章从传统陶瓷材质的单一性到现代陶瓷材质的丰富性为前导,探索综合材质与现代陶艺结合表现的诸多可能性,为现代陶艺表现形式的多样性起到一定的促进作用.     

Application of Reaction-Bonded Silicon Carbide in Manufacturing of Spacecraft Combustion Chamber

Silicon carbide (SiC) ceramics is a good structural ceramics material, which have a lot of excellent properties such as superior high-temperature strength up to a temperature of 1 350 ℃, chemical stability, good resistance to thermal shock and high abrasion resistance. The silicon carbide ceramics material has so far been used widely for manufacturing various components such as heat exchangers, rolls, rockets combustion chamber. Sintering of ceramics structural parts have many technological method, the reac...     

辽宁西北地区主要生态环境问题及其整治对策

辽宁西北地区的北部处于中国东部森林区向西部草原区的过渡带上.也是由暖温带半湿润气候向冷温带半干旱气候过渡、农业向牧业过渡的交错带.这一过渡带是中国一级生态敏感带的一部分.近年来,由于气候逐渐趋于暖旱化和人为的不合理开发,这一地区的生态环境逐渐恶化.列出了辽宁西北地区的7个主要生态环境问题,并相应的提出了8个生态环境整治对策.     

双门电冰箱的热传导问题

本文将根据热传导方程,对电冰箱达定态过程进行理论推导,以及定态后电冰箱单位时间吸收的热量,并由此计算出由于冰箱箱体的热量泄漏而消耗的能量。     

用扩展电阻法研究陶瓷微区电导性能

本文把扩展电阻法应用于陶瓷微区电导性能研究.建立了微区的定位标识系统,可精确、方便地对选定的微区进行电导性能及组分的重复测定.该方法在研究Ba(Sn_(1-x)Sb_x)O_3、ZnO及BaTiO_3半导体瓷应用中得到有意义的结果.