Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A

Weldments were produced using gas tungsten arc welding(GTAW) and pulsed current gas tungsten arc welding(PCGTAW) techniques with ERNiCr-3 filler wire. Macro examination revealed that the resultant weldments were free from defects. A refined microstructure was observed in the weldment fabricated through PCGTAW. Scanning electron microscopy(SEM) analysis revealed secondary phases in the grain boundaries. Energy-dispersive X-ray spectroscopy(EDS) analysis revealed that microsegregation of Cr carbide precipitates was completely eradicated through PCGTAW. The microsegregation of Nb precipitates was observed in the GTA and PCGTA weldments. X-ray diffraction(XRD) analysis revealed the existence of M_(23)C?_6 Cr-rich carbide and Ni_8Nb phases in the GTA weldments. By contrast, in the PCGTA weldments, the Ni_8Nb phase was observed. The Cr_2Ti phase was observed in both the GTA and the PCGTA weldments. Tensile tests showed that the strength and ductility of the PCGTA weldments were slightly higher than those of the GTA weldments.     

Is the valid species Synchaeta monopus Plate, 1889 (Rotifera: Monogononta) a product of preparation artefacts?

The morphology of soft-bodied rotifers, including those of Synchaeta spp, can be strongly affected by preparation artefacts including contraction and deformation. The long-standing, valid species Synchaeta monopus is known exclusively from ethanol- or formaldehyde-preserved material and no live specimens of it have ever been described. Although this alone is cause for concern, we could also reproduce unique characteristics diagnostic for this species (e.g. the swollen body and the rudimental foot) by subjecting specimens of Synchaeta pectinata to the preservation conditions under which it was first described. This proxy experiment and comparisons to other Synchaeta species indicate that literature occurrences of S. monopus likely represent preserved and deformed specimens of Synchaeta cecilia or other marine species of Synchaeta, thereby highlighting the importance of thorough morphological investigations of the habitus using live specimens and of features that are unaffected by preservation (e.g. the trophi). We therefore recommend that S. monopus be listed as a species inquirenda until topotypes are examined. Furthermore, in ecological studies including rotifers, where the examination of preserved material is often unavoidable, we stress that light-microscopical images of the habitus and trophi of the specimens minimally be included to facilitate independent verification of the species assignments.     

Connexins and pannexins in the skeleton: gap junctions,hemichannels and more

Regulation of bone homeostasis depends on the concerted actions of bone-forming osteoblasts and bone-resorbing osteoclasts, controlled by osteocytes, cells derived from osteoblasts surrounded by bone matrix. The control of differentiation, viability and function of bone cells relies on the presence of connexins. Connexin43 regulates the expression of genes required for osteoblast and osteoclast differentiation directly or by changing the levels of osteocytic genes, and connexin45 may oppose connexin43 actions in osteoblastic cells. Connexin37 is required for osteoclast differentiation and its deletion results in increased bone mass. Less is known on the role of connexins in cartilage, ligaments and tendons. Connexin43, connexin45, connexin32, connexin46 and connexin29 are expressed in chondrocytes, while connexin43 and connexin32 are expressed in ligaments and tendons. Similarly, although the expression of pannexin1, pannexin2 and pannexin3 has been demonstrated in bone and cartilage cells, their function in these tissues is not fully understood.     

Synopsis of ‘onychocellid’ cheilostome bryozoan genera

Genera assigned to the cheilostome bryozoan family Onychocellidae are revised based on the skeletal morphology of the type species and, when possible, the type material of these species. All genera are illustrated using scanning electron micrographs, some for the first time. Onychocellidae, which ranges from the Cenomanian stage of the Cretaceous to the Recent, has been a particularly troublesome family because of poorly defined generic concepts correlating at least in part with a paucity of morphological characters. Thirty-five genera are described in this review. Of these, two are recognised as subjective synonyms of other onychocellid genera (Rhebasia and Semieschara), one cannot be sufficiently characterised from the type material (Collura), and two are new: Aechmellina gen. nov. (type species Aechmella falcifera) and Kamilocella gen. nov. (type species Eschara latilabris). A neotype is chosen for Rhagasostoma hexagonum, the type species of Rhagasostoma. A key is provided to assist in the identification of onychocellid genera. Phylogenetic relationships between genera remain obscure and are unlikely to be fully resolved based on skeletal morphology alone. The family as an entity is loosely circumscribed and almost certainly paraphyletic, containing stem genera of other anascan familes such as Lunulitidae, Coscinopleuridae and Aspidostomatidae.

www.zoobank.org/urn:lsid:org:pub:63A31AD2-F049-42CB-A45B-557014DC286E     

Elucidating the diel and seasonal calling behaviour of Elachistocleis matogrosso (Anura: Microhylidae)

ABSTRACT

Acoustic monitoring provides the opportunity to study ecological processes that are difficult to assess with traditional surveys. Elachistocleis matogrosso is an anuran species, described in 2010, for which limited biological information is available. This study investigated the calling activity of the species in the north-eastern portion of the Pantanal, Brazil, a wetland area with marked seasonality between the dry and wet seasons. The calling activity of E. matogrosso was monitored using automated digital recorders in combination with automated signal recognition software over two different annual cycles. The species was vocally active only during the wet season (October – April), with a peak in November-December during the 2013–2014 annual cycle and in February-March during the 2015–2016 annual cycle. The peak calling activity occurred at dusk. This species has nocturnal habits and an explosive breeding activity. The detection of the species was intermittent, which suggests that environmental predictors or site-specific conditions might play an important role in species detection. Moreover, this intermittent occupancy indicated that surveys that employ traditional field techniques would likely fail to detect this species. We describe an effective protocol for detecting E. matogrosso with acoustic monitoring, which requires recording during 20 days in February from 17:01 to 05:00. Our procedure would be easy to adapt to other anuran species, and it could be used for investigating new localities and assessing population changes over time.     

Constructing and evaluating core inflation measures from component‐level inflation data

This paper undertakes a comprehensive examination of 10 measures of core inflation and evaluates which measure produces the best forecast of headline inflation out‐of‐sample. We use the Personal Consumption Expenditure Price Index as our measure of inflation. We use two sets of components (17 and 50) of the Personal Consumption Expenditure Price Index to construct these core inflation measures and evaluate these measures at the three time horizons (6, 12 and 24 months) most relevant for monetary policy decisions. The best measure of core inflation for both sets of components and over all time horizons uses weights based on the first principal component of the disaggregated (component‐level) prices. Interestingly, the results vary by the number of components used; when more components are used the weights based on the persistence of each component is statistically equivalent to the weights generated by the first principal component. However, those forecasts using the persistence of 50 components are statistically worse than those generated using the first principal component of 17 components. The statistical superiority of the principal component method is due to the fact that it extracts (in the first principal component) the common source of variation in the component level prices that accurately describes trend inflation over the next 6–24 months.