Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A

Weldments were produced using gas tungsten arc welding(GTAW) and pulsed current gas tungsten arc welding(PCGTAW) techniques with ERNiCr-3 filler wire. Macro examination revealed that the resultant weldments were free from defects. A refined microstructure was observed in the weldment fabricated through PCGTAW. Scanning electron microscopy(SEM) analysis revealed secondary phases in the grain boundaries. Energy-dispersive X-ray spectroscopy(EDS) analysis revealed that microsegregation of Cr carbide precipitates was completely eradicated through PCGTAW. The microsegregation of Nb precipitates was observed in the GTA and PCGTA weldments. X-ray diffraction(XRD) analysis revealed the existence of M_(23)C?_6 Cr-rich carbide and Ni_8Nb phases in the GTA weldments. By contrast, in the PCGTA weldments, the Ni_8Nb phase was observed. The Cr_2Ti phase was observed in both the GTA and the PCGTA weldments. Tensile tests showed that the strength and ductility of the PCGTA weldments were slightly higher than those of the GTA weldments.     

Is the valid species Synchaeta monopus Plate, 1889 (Rotifera: Monogononta) a product of preparation artefacts?

The morphology of soft-bodied rotifers, including those of Synchaeta spp, can be strongly affected by preparation artefacts including contraction and deformation. The long-standing, valid species Synchaeta monopus is known exclusively from ethanol- or formaldehyde-preserved material and no live specimens of it have ever been described. Although this alone is cause for concern, we could also reproduce unique characteristics diagnostic for this species (e.g. the swollen body and the rudimental foot) by subjecting specimens of Synchaeta pectinata to the preservation conditions under which it was first described. This proxy experiment and comparisons to other Synchaeta species indicate that literature occurrences of S. monopus likely represent preserved and deformed specimens of Synchaeta cecilia or other marine species of Synchaeta, thereby highlighting the importance of thorough morphological investigations of the habitus using live specimens and of features that are unaffected by preservation (e.g. the trophi). We therefore recommend that S. monopus be listed as a species inquirenda until topotypes are examined. Furthermore, in ecological studies including rotifers, where the examination of preserved material is often unavoidable, we stress that light-microscopical images of the habitus and trophi of the specimens minimally be included to facilitate independent verification of the species assignments.     

Integrative taxonomy at the nexus of population divergence and speciation in insular speckled rattlesnakes

ABSTRACT

We describe two diminutive species of rattlesnakes (genus Crotalus) from small nearshore islands off the coast of Baja California in the western Gulf of California, Mexico. In order to test the hypothesis that some island populations represent cohesive species entities, we applied linear discriminant analysis and uniform validation procedures to multiple classes of intrinsic trait data. By using previously recognised species to establish a threshold for species recognition, we found that assignment of specimens to either new species was as probable as with other established rattlesnake species within the speckled rattlesnake (Crotalus mitchellii) complex. We also found that assignment of specimens from other island populations was not as probable as for the established species, and these populations are referable to C. pyrrhus. The species endemic to Piojo Island is most closely related to other island and mainland populations of C. pyrrhus whereas the species endemic to Cabeza de Caballo Island is apparently most closely related to C. angelensis, a nearby island endemic of large body size. However, patterns from both mitochondrial and nuclear phylogenies, and phenotypic variation, indicate that evolutionary trajectories of both of these species have been influenced by introgression from C. angelensis. We speculate that collective evidence based on contrasting patterns of nuclear and mitochondrial evolution supports a hybrid origin of the species from Cabeza de Caballo Island followed by exceptionally rapid mitochondrial evolution. Consistent with small body size, both species show a reduction in various scale counts relative to other species of the C. mitchellii species complex, suggesting that dwarfism is not simply a plastic response to insular conditions.

http://www.zoobank.org/urn.lsid:zoobank.org:pub:FBC8A11B-04A3-4231-85CA-3972DF5A42FF     

Connexins and pannexins in the skeleton: gap junctions,hemichannels and more

Regulation of bone homeostasis depends on the concerted actions of bone-forming osteoblasts and bone-resorbing osteoclasts, controlled by osteocytes, cells derived from osteoblasts surrounded by bone matrix. The control of differentiation, viability and function of bone cells relies on the presence of connexins. Connexin43 regulates the expression of genes required for osteoblast and osteoclast differentiation directly or by changing the levels of osteocytic genes, and connexin45 may oppose connexin43 actions in osteoblastic cells. Connexin37 is required for osteoclast differentiation and its deletion results in increased bone mass. Less is known on the role of connexins in cartilage, ligaments and tendons. Connexin43, connexin45, connexin32, connexin46 and connexin29 are expressed in chondrocytes, while connexin43 and connexin32 are expressed in ligaments and tendons. Similarly, although the expression of pannexin1, pannexin2 and pannexin3 has been demonstrated in bone and cartilage cells, their function in these tissues is not fully understood.     

Synopsis of ‘onychocellid’ cheilostome bryozoan genera

Genera assigned to the cheilostome bryozoan family Onychocellidae are revised based on the skeletal morphology of the type species and, when possible, the type material of these species. All genera are illustrated using scanning electron micrographs, some for the first time. Onychocellidae, which ranges from the Cenomanian stage of the Cretaceous to the Recent, has been a particularly troublesome family because of poorly defined generic concepts correlating at least in part with a paucity of morphological characters. Thirty-five genera are described in this review. Of these, two are recognised as subjective synonyms of other onychocellid genera (Rhebasia and Semieschara), one cannot be sufficiently characterised from the type material (Collura), and two are new: Aechmellina gen. nov. (type species Aechmella falcifera) and Kamilocella gen. nov. (type species Eschara latilabris). A neotype is chosen for Rhagasostoma hexagonum, the type species of Rhagasostoma. A key is provided to assist in the identification of onychocellid genera. Phylogenetic relationships between genera remain obscure and are unlikely to be fully resolved based on skeletal morphology alone. The family as an entity is loosely circumscribed and almost certainly paraphyletic, containing stem genera of other anascan familes such as Lunulitidae, Coscinopleuridae and Aspidostomatidae.

www.zoobank.org/urn:lsid:org:pub:63A31AD2-F049-42CB-A45B-557014DC286E     

Exploring Systemic Problems in IS Adoption Using Critical Systems Heuristics

Systemic Practice and Action Research - Most of the traditional technology acceptance models revolve around information systems (IS)/information technology (IT) adoption at individual user level....