基于文献计量分析的公司创业投资研究现状、主题与展望

公司创业投资是公司创业、创业投资、战略管理和创新等多个领域的关键话题.文章在概括1980—2020年Web of Science数据库收录的公司创业投资文献特征的基础上,追溯公司创业投资内涵与定义的发展,梳理和提炼该领域研究的主题内容.文章将公司创业投资研究划分为初始萌芽、平稳发展和深化发展三个阶段,系统归纳分析了公司创业投资的目标与动机、影响因素、绩效效应以及其与其他公司创业方式的关系四个主题的研究内容.最后,在评述现有研究进展和不足的基础上,展望公司创业投资研究的未来方向.     

圆形均匀带电薄板电场的数值积分和可视化

利用均匀带电圆环在直角坐标系中的电势和电场强度的2个分量的公式,推导了均匀带电圆形薄板的电势和电场强度的2个分量的积分公式.将积分公式无量纲化,采用数值积分法计算电势和场强的值,绘制曲面、二维等势线和电场线.     

Side-Channel Attacks in a Real Scenario

Existing Side-Channel Attacks(SCAs) have several limitations and, rather than to be real attack methods,can only be considered to be security evaluation methods. Their limitations are mainly related to the sampling conditions, such as the trigger signal embedded in the source code of the encryption device, and the acquisition device that serves as the encryption-device controller. Apart from it being very difficult for an attacker to add a trigger into the original design before making an attack or to control the encryption device, there is a big gap in the capacity of existing SCAs to pose real threats to cipher devices. In this paper, we propose a new method, the sliding window SCA(SW-SCA), which can be applied in scenarios in which the acquisition device is independent of the encryption device and for which the encryption source code requires no trigger signal or modification. First,we describe the main issues in existing SCAs, then we theoretically analyze the effectiveness and complexity of our proposed SW-SCA —a method that can incorporate a sliding-window mechanism into almost all of the existing non-profiled SCAs. The experimental results for both simulated and physical traces verify the effectiveness of the SW-SCA and the appropriateness of its theoretical complexity.     

The Life-Cycle Model with Optimal Retiring Age and Simulation

In this paper, a life-cycle model with retirement is set up to study how an individual chooses the optimal retiring age on account of wage growth rate, longevity and healthy state. It is proved that there exists optimal retiring age under given conditions. The numerical simulations are given to show how wage growth rate, longevity and healthy state affect retiring age.     

广东一流高职院校建设研究:进展、问题与对策--基于2018年18所院校中期检查报告的分析

自"广东一流高职院校建设计划"实施以来,深圳职业技术学院等18所建设单位通过树立共同愿景、践行组合策略、实施绩效价值导向的目标管理和辐射带动发展,显著促进了内涵建设。但是,由于周期短、任务重等因素,面临着保障性政策乏力、"放管服"体制机制改革艰巨、"专业-产业"契合度有待提升、高水平师资引培问题突出、国际化发展广度与深度不足、产教融合深度不够等问题。鉴于此,在未来发展中应针对以上六个问题予以重点突破。     

微流控法制备用于电泳显示微胶囊的微液珠研究

本文基于微流控技术，提出一种制备电泳显示液微胶囊的新方法，解决了传统电泳微胶囊制备方法中颗粒粒径不均匀、影响显示器件的显示性能及其驱动波形设计等问题。实验中使用了两种玻璃汇聚流通道(小型和大型)，外相溶液为1.5%明胶阿拉伯胶混合溶液，内相为四氯乙烯溶液。当小型通道和大型通道外相溶液流速与内相溶液体积流速比分别为2:1和10:6时，可以得到液滴平均直径分别为47 m和315 m的均匀的微液珠。同时，该方法可以精确控制微胶囊粒径大小，通过调节内外相流速，可以得到粒径在40 m至375 m范围内的大小均匀的微胶囊。与传统机械搅拌法制备的微液珠（52 18.81 m）相比，微流控法制备的微液珠（450.28 m）粒径分布得到了很大改善。该方法为电泳显示器显示效果的改善提供了可行方法。     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.