Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

The coconut pathosystem: weed hosts of nymphs of the American palm Cixiid Haplaxius crudus (Hemiptera: Fulgoroidea)

Lethal yellowing (LY) of coconut palm (Cocos nucifera L., Arecaceae) is a disease of economic importance that is caused by the phytoplasma ‘Candidatus Phytoplasma palmae’ and is transmitted by the planthopper Haplaxius crudus (Van Duzee) (Hemiptera: Cixiidae). This study explores the weeds used by H. crudus nymphs and other Cixiidae in a coconut pathosystem in southern Mexico. Nymphs were collected directly from the root system of each weed by hand or with the help of a vacuum after carefully opening the culm. This study included 11 species of weeds: nine Poaceae [Brachiaria decumbens Stapf, B. humidicola (Rendle) Schweick, B. mutica (Forssk.) Stapf, Digitaria abyssinica (Hochst. Ex A. Rich.) Stapf, Eustachys petraea (Sw.) Desv., Leersia hexandra Sw., Panicum laxum Sw., P. maximum Jacq., Paspalum notatum Flüggé]; one Cyperaceae [Cyperus ligularis L.], and one Portulacaceae: [Portulaca pilosa L.]. Brachiaria mutica, E. petraea, B. humidicola, P. maximum were identified as the principal host species for H. crudus nymphs. Brachiaria decumbens, D. abyssinica, and C. ligularis are new host records for the nymphs of H. crudus. Additionally, it was found that H. crudus may coexist with its cogeners H. skarphion Kramer (Cixiidae) and H. caldwelli Kramer (Cixiidae), on B. mutica. On C. ligularis, H. crudus may coexist with Oecleus snowi Ball (Cixiidae) nymphs. These results suggest that in the coconut pathosystem there is a complex of multitrophic interactions that should be considered in integrated management of LY.     

Redescription of Retilaskeya horrida (di Monterosato, 1874) comb. nov. and a re-evaluation of the taxonomic affinity of the genus Retilaskeya (Caenogastropoda: Triphoroidea)

The family Cerithiopsidae H. Adams and A. Adams, 1853 is distributed worldwide, and comprises around 800 extant species divided into ~40 genera. The most speciose genus within the family is Cerithiopsis Forbes and Hanley, 1850, a taxon currently used as a general receptacle rather than as a proper phylogenetic lineage. We hereby redescribe the rare species Cerithiopsis horrida di Monterosato, 1874, review its nomenclature, known material, and distribution as well as figure the entire protoconch, operculum, and radula for the first time. Our results highlight extreme differences between ‘Cerithiopsis’ horrida and the Cerithiopsis type species Cerithiopsis tubercularis (Montagu, 1803) and strong morphological and radular similarities with species belonging to the genus Retilaskeya Marshall, 1978. A wide discussion lists several taxa that might be ascribed to the same group of species, which presumably constitute a different worldwide lineage. Pending relevant molecular phylogenetic studies of the Triphoroidea Gray, 1847, for morphological conformity we suggest transferring ‘Cerithiopsis’ horrida to the genus Retilaskeya, and the same action is presumably appropriate for its possible sister species ‘Cerithiopsis’ leopardus Rolán and Gori, 2013. Finally, Retilaskeya better conforms to Newtoniellidae Korobkov, 1955 than Cerithiopsidae.     

Comparison of breeding biology aspects of Fluvicola nengeta (Aves: Tyrannidae) between two nesting sites

Fluvicola nengeta is an insectivorous bird that belongs to the Tyrannidae family, which lives close to bodies of water and can occur in urban areas as well. It makes use of natural and man-made substrates to build its nests. This study aims at describing the reproductive biology of F. nengeta by comparing nests built on vegetation and man-made structures as to their shapes, nest dimensions, building materials, distance from bodies of water and reproductive success. Forty-four nests were found, where 30 were located in vegetation and 14 on man-made structures. Nests did not exhibit any single pattern and were divided into three distinct shapes: closed/globular/base; closed/ovoid/base (45.5%; n = 5 for both) and low cup/base (9%; n = 1). Nests built on man-made structures exhibited a larger amount of anthropic material, such as plastic and paper, instead of plant-derived materials. Nests on man-made structures were found to be higher up from the ground (459.8 ± 46.9 m) and farther from water (232.9 ± 54.8 m) in comparison to those on vegetation (92.2 ± 28.6 m and 7.3 ± 4.7 m, respectively), aside from exhibiting a higher Mayfield reproductive success (37%) when compared to nests built on vegetation (34%). The estimated values of the daily survival rate (DSR) for vegetation nests were 0.997 for the incubation period and 0.928 for the nestling period. In man-made structure nests, DSRs were 0.968 and 0.964, respectively, during the incubation and nestling periods. The period survival rate (PSR) of nests in vegetation was significantly higher than the PSRs of nests in man-made structures during the incubation period. DSRs did not differ between incubation and nestling periods for either nesting sites.     

Elucidating the diel and seasonal calling behaviour of Elachistocleis matogrosso (Anura: Microhylidae)

ABSTRACT

Acoustic monitoring provides the opportunity to study ecological processes that are difficult to assess with traditional surveys. Elachistocleis matogrosso is an anuran species, described in 2010, for which limited biological information is available. This study investigated the calling activity of the species in the north-eastern portion of the Pantanal, Brazil, a wetland area with marked seasonality between the dry and wet seasons. The calling activity of E. matogrosso was monitored using automated digital recorders in combination with automated signal recognition software over two different annual cycles. The species was vocally active only during the wet season (October – April), with a peak in November-December during the 2013–2014 annual cycle and in February-March during the 2015–2016 annual cycle. The peak calling activity occurred at dusk. This species has nocturnal habits and an explosive breeding activity. The detection of the species was intermittent, which suggests that environmental predictors or site-specific conditions might play an important role in species detection. Moreover, this intermittent occupancy indicated that surveys that employ traditional field techniques would likely fail to detect this species. We describe an effective protocol for detecting E. matogrosso with acoustic monitoring, which requires recording during 20 days in February from 17:01 to 05:00. Our procedure would be easy to adapt to other anuran species, and it could be used for investigating new localities and assessing population changes over time.     

Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A

Weldments were produced using gas tungsten arc welding(GTAW) and pulsed current gas tungsten arc welding(PCGTAW) techniques with ERNiCr-3 filler wire. Macro examination revealed that the resultant weldments were free from defects. A refined microstructure was observed in the weldment fabricated through PCGTAW. Scanning electron microscopy(SEM) analysis revealed secondary phases in the grain boundaries. Energy-dispersive X-ray spectroscopy(EDS) analysis revealed that microsegregation of Cr carbide precipitates was completely eradicated through PCGTAW. The microsegregation of Nb precipitates was observed in the GTA and PCGTA weldments. X-ray diffraction(XRD) analysis revealed the existence of M_(23)C?_6 Cr-rich carbide and Ni_8Nb phases in the GTA weldments. By contrast, in the PCGTA weldments, the Ni_8Nb phase was observed. The Cr_2Ti phase was observed in both the GTA and the PCGTA weldments. Tensile tests showed that the strength and ductility of the PCGTA weldments were slightly higher than those of the GTA weldments.     

Synopsis of ‘onychocellid’ cheilostome bryozoan genera

Genera assigned to the cheilostome bryozoan family Onychocellidae are revised based on the skeletal morphology of the type species and, when possible, the type material of these species. All genera are illustrated using scanning electron micrographs, some for the first time. Onychocellidae, which ranges from the Cenomanian stage of the Cretaceous to the Recent, has been a particularly troublesome family because of poorly defined generic concepts correlating at least in part with a paucity of morphological characters. Thirty-five genera are described in this review. Of these, two are recognised as subjective synonyms of other onychocellid genera (Rhebasia and Semieschara), one cannot be sufficiently characterised from the type material (Collura), and two are new: Aechmellina gen. nov. (type species Aechmella falcifera) and Kamilocella gen. nov. (type species Eschara latilabris). A neotype is chosen for Rhagasostoma hexagonum, the type species of Rhagasostoma. A key is provided to assist in the identification of onychocellid genera. Phylogenetic relationships between genera remain obscure and are unlikely to be fully resolved based on skeletal morphology alone. The family as an entity is loosely circumscribed and almost certainly paraphyletic, containing stem genera of other anascan familes such as Lunulitidae, Coscinopleuridae and Aspidostomatidae.

www.zoobank.org/urn:lsid:org:pub:63A31AD2-F049-42CB-A45B-557014DC286E