基于40Cr高温动态力学性能的磨削表面动态再结晶行为

通过分离式霍普金森压杆(SHPB)实验得到了40Cr合金钢在高温高应变率下真应力-真应变曲线，据此确定了材料发生动态再结晶的临界条件.采用解析法和实验法分别求解了磨削强化层的温度场和塑性应变场分布.结果表明，磨削强化层在磨削深度方向具有较大的温度和塑性应变梯度;150μm强化层内会发生奥氏体转变;磨削表面最高温度可达1060℃.在磨削亚表面60μm内会产生剧烈的塑性变形，达到了再结晶的临界条件.较大的磨削深度使磨削强化层塑性应变增大，再结晶现象越充分，微观组织细化程度越高.     

位移放大型扭转阻尼器性能分析

为了加固梁柱节点、避免框架结构出现"弱节点"的破坏模式、提高框架结构整体的抗震和耗能能力,研制出一种具有自主知识产权的位移放大型扭转阻尼器(DATD),并对其进行数值分析和试验研究.首先,设计了18个具有不同参数的DATD,建立其有限元模型进行数值分析;随后,设计并制作了一个DATD,进行性能试验并与有限元分析结果对比.结果表明:DATD滞回曲线饱满,耗能能力强;有限元分析与性能试验的滞回曲线吻合较好,且随着加载位移的增加,两者间误差变小,因此可以采用建立的有限元模型来研究DATD的力学性能.最后,对DATD进行参数影响分析,研究了铅芯直径、铅芯距中轴距离、橡胶层直径、橡胶层厚度及橡胶剪切模量对其特征参数的影响,结果表明:DATD的屈服剪力、等效刚度、等效阻尼比及耗能系数随着铅芯直径增大而明显增大,随着铅芯距中轴距离的增大略有增大;随着橡胶层直径、橡胶剪切模量的增大,屈服剪力及等效刚度逐渐增大而耗能系数及等效阻尼比逐渐减小;4个特征参数均随着橡胶层厚度的增大而略微减小.     

齐次核的Hilbert型多重级数不等式取最佳常数因子的等价条件及应用

利用实分析技巧和权函数方法, 讨论具有齐次核的多重级数Hilbert型不等式, 得到了其取最佳常数因子的充分必要条件, 并给出其应用.     

桅杆结构数据采集软件

文章介绍了桅杆结构数据采集软件的编制 ,并基于HY -8021多功能数据采集板与光电位置传感器的特性 ,使得该软件可满足以低频振动为主的建筑工程结构数据采集的要求。     

井下抽油泵柱塞与泵筒运动规律的研究

用三元振动模型,综合考虑油柱、抽油杆柱和油管柱的振动.建立起数学模型并离散化,然后用微机编程求解微分方程组.对不同工况下的抽油泵运动规律和抽油机示功图进行分析研究,得出了油管应予锚定的结论,并给出了不同抽油机的适用范围.为进一步研究抽油泵的井下工作机理和故障原因打下了基础.     

长春市民办高校与公立高校体育科研现状对比研究

采用文献资料法、数理统计法、比较法对吉林省民办高校和公立高校体育教师的科研现状进行比较分析,比较二者不同年龄、学历、职称的教师发表论文状况,分析二者的科研学术氛围及科研条件,旨在了解长春市两类高校的体育科研的现状,为长春市高校体育科研水平的提高提供参考。     

基于多元时间序列融合的飞行动作识别方法

针对飞行动作数据随机性强与长度不一致的问题,提出通过减小动态时间规整(DTW)算法的搜索空间,并定义不同特征参数贡献度的概念,实现对飞行数据的多元时间序列融合,从而完成对战术机动动作的识别。通过引入预分类和细分类结合的方式,对动作数据进行预处理,然后根据改进的动态时间规整(WDTW)算法对待测数据进行识别。仿真实验表明,相比传统DTW算法,WDTW算法通过降低算法复杂度,识别计算时间变化明显;对核密度与精准度系数的分析表明识别准确率亦有所提高。实验结果验证了所提方法的准确性。     

Homology Priority Task Scheduling in μC/OS-Ⅱ Real-Time Kernel

μC/OS-Ⅱ is an open source real-time kernel adopting priority preemptive schedule strategy. Aiming at the problem of μC/OS-Ⅱ failing to support homology priority tasks scheduling, an approach for solution is proposed. The basic idea is adding round-robin scheduling strategy in its original scheduler in order to schedule homology priority tasks through time slice roundrobin. Implementation approach is given in detail. Firstly, the Task Control Block （TCB） is extended. And then, a new priority index table is created, in which each index pointer points to a set of homology priority tasks. Eventually, on the basis of reconstructing μC/OS-Ⅱ real-time kernel, task scheduling module is rewritten. Otherwise, schedulability of homology task supported by modified kernel had been analyzed, and deadline formula of created homology tasks is given. By theoretical analysis and experiment verification, the modified kernel can support homology priority tasks scheduling, meanwhile, it also remains preemptive property of original μC/OS-Ⅱ.     

The Difference of the Pulmonary-Artery Pressure of the Migrants from Difference Elevation at the 4636 - 4907 m Altitude

Study Objective： To compare and analyze the changes of the pulmonary-artery pressure of the migrants coming from different elevation in the hypoxic environment of 4636 - 4907 m extreme altitude. To explore the susceptibility to hypoxic pulmonary-artery hypertension （PH） in the subjects from different altitude and profession. Methods： By using Color Doppler Ultmsonography （CDU）, measuring the pulmonary-artery pressure of 207 healthy men, who had continuously being lived and worked at the extreme altitude for more than six months, and then were divided into three groups according to their profession and the altitude of original living place. Results： There was a significant difference in the outcomes of pulmonary-artery pressure from the 3 groups. Conclusions： Altitude of original living place, labor intensity are some of factors that impact the pulmonary-artery pressure of the people who exposure to a hypoxic environment. The pulmonary- artery pressure of person without strenuously physical work experience was more sensitive to hypoxic surroundings than that of labor workers. It was not always the fact at an extreme altitude that the moderate altitude mountaineers were superior to other migrants from a lower altitude or plain. The higher PH was found in the groups of the moderate altitude mountaineers and labor workers. It is unlikely certain that one with PH would surfer from HAPE.     

北桥设计中的总线周期精确事务级建模

总线周期精确事务级建模能解决系统设计中的仿真精度和速度之间的矛盾。以北桥中的总线设计为背景,采用SystemC中接口方法调用的原理,实现了对Wishbone总线的周期精确事物级建模,并给出了具体的实现方法和测试方法,具有一定的通用性。