基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

高速电主轴热特性仿真与实验研究

对高速电主轴温度场分布随转速的变化规律进行了研究。通过在外壳上布置一定数量的温度传感器,对不同转速下的外壳温度进行实时测量,并将实验结果与ANSYS的模拟结果进行对比,验证了采用在电主轴外壳上布置多个测点测量与仿真相结合的方法来预测电主轴内部温度场分布的可行性;另外还分析了在不同转速下,高速电主轴关键部位的温升,仿真结果表明:主轴在6000~10000 r/min时,温升呈线性增加,在大于10000 r/min后,温升以指数规律增加。     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

Developmental modes of the Neoproterozoic-Lower Paleozoic marine hydrocarbon source rocks in China

Based on the researches on rock type, the mode of occurrence, diagnostic minerals and creatures, the sedimentary geochemistry and organic facies of Chinese marine source rocks from wells and outcrops, and on the research findings of developmental modes of foreign marine source rock, the authors consider that it is impossible to objectively make clear the formation mechanism of hydrocarbon source rock with high organic matter abundance by either single mode of preservation or high organic matter productivity. According to the Chinese geological features, the formation mechanism of the Neoproterozoic-Lower Paleozoic marine source rock is generalized into four modes, namely, thermal water activity-upwelling flow-anoxic; carbonate gentle slope-upwelling flow; xerothermic climate-brine euxinic milieu; and humid climate-retained euxinic milieu; as the Lower Cambrian undercompensation basin organic facies （the Tarim Basin, South China and southwestern margin of North China）, carbonate gentle lime mud bound organic facies （the Upper Ordovician in Tazhong region of the Tarim Basin and the Lower Silurian in the Upper Yangtze Platform）, the Middle Cambrian evaporation laggon organic facies （the Tarim Basin and the Upper Yangtze Platform）, enclosed undercompensation terrigenous bay organic facies （the Middle-Upper Ordovician in the west of the Tarim Basin, the Lower Silurian Long- maxi Formation in the Upper Yangtze platform）. Chinese marine sedimentations with lower organic matter abundance are generalized into two modes of consumption-dilution mode of open epicontinental sea and depletion-dilution mode of supercompensation basin.     

浅析供热计量收费计算原理与方法

介绍了热量计量的基本原理和热费确定的基本原则,阐述了供热总费用的构成与计算原理以及用户热费的构成与计算原理。     

低温热水地面辐射供暖设计问题探讨

针对低温热水地面辐射供暖设计中容易忽视或规范中无明确规定的问题提出相应的技术措施和解决方案。     

小区暖气失调原因调查和改造方案的实施

通过对镇苑小区采暖情况的跟踪调查及数据采集，找出了供暖系统不热的原因，据此对系统进行了针对性的改造，取得了良好的改造效果。     

A new model for the life prediction of GH4133 under TMF conditions

Thermal mechanical cyclic strain tests were carried out under in-phase and out-of-phase conditions on a Nickel-base Superalloy GH4133 in the temperature range of 571-823℃. Based on analyzing the present models of TMF (thermal mechanical fatigue) life prediction, a new model for predicting nickel-base superalloy TMF lifetime was proposed.TMF life of superalloy GH4133 was calculated accurately based on the new model. Experimental TMF life has been compared with the calculatedresults and all results fall in the scatter band of 1.5. The calculating results show that the new model is not only simple, but also precise. This model will play great roles in life prediction of the metal materials and the engineering components subjected to non-isothermal service conditions.     

地下含水层热储井位置选择和布置

地下含水层热储开发技术面临一系列问题,寻找适合热储用的含水层和合理布置热储井是解决问题的第一步.综合考虑含水层的地质结构特征,适合热储的含水层应该是承压含水层,热储应该采用同层方式.单个热储井的影响半径可以通过热平衡和热扩散原理求得.合理布置热储井间的相对位置,可以有效抵消原有地下水的流动以及渗流系数不一致的影响.利用井之间的渗流耦合作用,在热储井之间布置调节井,主动控制热储水的波及范围,可以实现热储井布置的相对"紧凑".     

热管集热墙的实验研究

一、引言 被动式太阳房中大多数利用特朗勃墙作为集热蓄热墙。这种集热P件在有日照时外表面温度高,热损失大,夜间供热量小,供热品质不佳。在夜间增加保温盖板或保温帘可以减少热损失,但又带来了构造的复杂化及人工操作的麻烦。 为了克服上述缺点,设计了一种热管与水箱相结合的太阳能集热蓄热供暖装置,对其进行了实验研究。实验的目的是(1)与传统的特朗勃墙的热工性能进行对比;(2)利用实验数据回归出该种集热墙的热性能经验公式;(3)对其进行技术经济评价。