目标电磁散射的面中心立方体网格FDTD方法

基于面中心立方体(face-centered cube, FCC)网格的空间结构, 由麦克斯韦方程出发, 推导了基于FCC网格的单轴各向异性介质完全匹配层(uniaxial anisotropic media perfectly matched layer, UPML)吸收边界条件以及近-远场外推边界条件的三维迭代式。通过典型算例, 先后验证了基于面中心立方体网格的时域有限差分(FCC-finite difference time domain, FCC-FDTD)方法的UPML吸收边界条件和近远场外推边界条件的正确性。最后通过计算金属球的后向雷达散射截面(radar cross section, RCS)比较了FCC-FDTD方法与传统FDTD方法的计算精度, 结果显示FCC-FDTD方法具有更高的计算精度。     

轴向磁场作用下平均Taylor涡对湍流脉动的影响

采用基于高精度电流守恒格式的直接数值模拟方法，对轴向磁场作用下导电流体的湍流Taylor-Couette流动进行计算.在等电势边界条件的同心圆筒中，磁场与感生电流引起的反向周向速度分布、以及其对平均流动的影响被揭示出来.采用两种不同的湍流流场平均方法，将湍流中的全部脉动划分为平均流动(Taylor涡)的贡献和湍流的贡献.通过计算不同磁场强度下的湍动能的分布，对比分析轴向磁场对平均Taylor涡流和湍流两种贡献方式的影响.     

Processing and characterization of the microstructure and mechanical properties of Al6061–TiB2 composite

In the present research, aluminum metal matrix composites were processed by the stir casting technique. The effects of TiB2 rein-forcement particles, severe plastic deformation through accumulative roll bonding (ARB), and aging treatment on the microstructural charac-teristics and mechanical properties were also evaluated. Uniaxial tensile tests and microhardness measurements were conducted, and the micro-structural characteristics were investigated. Notably, the important problems associated with cast samples, including nonuniformity of the rein-forcement particles and high porosity content, were solved through the ARB process. At the initial stage, particle-free zones, as well as particle clusters, were observed on the microstructure of the composite. However, after the ARB process, fracturing phenomena occurred in brittle ceramic particles, followed by breaking down of the fragments into fine particles as the number of rolling cycles increased. Subsequently, com-posites with a uniform distribution of particles were produced. Moreover, the tensile strength and microhardness of the ARB-processed com-posites increased with the increase in the reinforcement mass fraction. However, their ductility exhibited a different trend. With post-deforma-tion aging treatment (T6), the mechanical properties of composites were improved because of the formation of fine Mg2Si precipitates.     

不同周围流速和电压下的绝缘子积污特性

为了研究绝缘子在不同电压下表现的积污特性，利用流体力学的相关知识和电场理论，建立了模拟风沙的多物理场仿真模型.研究结果表明，周围流动速度较小时，绝缘子两端的电压增大，积污质量发会有一定程度的增加，且积污与电场力的变化密切相关，结合静电场分析会更准确；周围流动速度较大时，即使电压增大，积污质量也不会发生太大的变化.     

基于改进OMP算法的稀疏目标微波关联成像方法

利用稀疏重构类方法进行雷达微波关联成像时, 传统的正交匹配追踪(orthogonal matching pursuit, OMP)算法在每一次迭代过程中均需要求解目标函数的最小二乘解, 导致成像算法计算复杂度随矩阵规模和迭代次数增加而急剧攀升。针对此问题, 结合频率捷变思想, 提出了一种改进OMP算法的稀疏目标微波关联成像方法。首先, 阐明了微波关联成像机理, 并构建了微波关联成像信号模型; 然后, 利用共轭梯度法对OMP算法中的最小二乘求解步骤进行了改进, 并分析了改进后算法的计算量; 最后, 通过与最小二乘成像方法、匹配滤波成像方法和基于传统OMP稀疏重构的成像方法进行计算机对比仿真实验, 证明了本文算法的正确性与优越性。     

I ain’t afraid of no ghost

This paper criticizes the traditional philosophical account of the quantization of gauge theories and offers an alternative. On the received view, gauge theories resist quantization because they feature distinct mathematical representatives of the same physical state of affairs. This resistance is overcome by a sequence of ad hoc modifications, justified in part by reference to semiclassical electrodynamics. Among other things, these modifications introduce ”ghosts”: particles with unphysical properties which do not appear in asymptotic states and which are said to be purely a notational convenience. I argue that this sequence of modifications is unjustified and inadequate, making it a poor basis for the interpretation of ghosts. I then argue that gauge theories can be quantized by the same method as any other theory. On this account, ghosts are not purely notation: they are coordinates on the classical configuration space of the theory—specifically, on its gauge structure. This interpretation does not fall prey to the standard philosophical arguments against the significance of ghosts, due to Weingard. Weingard’s argumentative strategy, properly applied, in fact tells in favor of ghosts’ physical significance.     

准噶尔盆地车排子凸起新近系沙湾组重矿物、U-Pb年代学特征及物源分析

综合岩石学特征、砂岩碎屑组分特征、重矿物组合特征和锆石U-Pb年代学特征, 探讨准噶尔盆地车排子凸起新近系沙湾组沙一段的沉积特征和物源演化过程。结果表明, 车排子凸起存在南北双物源体系, 沙一段以粗碎屑沉积为主。在一砂组沉积阶段, 扎依尔山为北部物源区, 发育小规模扇三角洲沉积; 中天山及北天山造山带为南部物源区, 发育辫状河三角洲沉积。在二砂组沉积阶段, 中天山供给减弱, 北天山供给加强, 盆地水体加深, 南部辫状河三角洲前端分布小型滨浅湖滩坝。南部物源变化的主要原因可能是受印度板块和欧亚板块碰撞的远程影响, 天山在新生代中新世中期经历强烈的挤压和抬升过程, 造成北天山隆升, 为车排子凸起提供物源。     

自动调温与均温艾灸仪的研制及温度场分析

为了解决现有艾灸过程中热量不均衡、热量利用率低、操作繁琐等问题，达到高效利用热量和药烟的目标，本文设计并实现了一种新型智能艾灸仪，该艾灸仪包含燃烧、熏蒸、收集及控制系统，可以实现烟雾自动收集、温度精确智能控制以及艾灸操作流程简化等功能。基于传热学理论对艾灸仪的熏蒸系统建立热力学模型，并利用Fluent软件对其进行温度场分析，分析结果表明：锥形流道是两种结构方案中较优的流道结构；所设计的温度均衡隔板对艾灸仪的温度均衡起到至关重要的作用；实际使用中存在的泄漏不仅对升温速度有轻微的影响，对温度场的分布也有一定的影响。设计与研究结果为现代艾灸仪的临床应用提供了理论基础。     

基于数据场联合PRI变换与聚类的雷达信号分选

基于脉冲描述字进行雷达信号分选时,传统聚类算法需要预先人工设定聚类中心和聚类数目。针对该问题,提出一种基于数据场理论联合脉冲重复间隔(pulse repetition interval,PRI)变换与聚类的雷达信号分选新方法。首先,依据数据场理论,基于势值大小实现干扰点剔除,而后利用PRI变换算法进行PRI估计,依据PRI估计值将归一化脉冲描述字数据预分类,进而以各类数据集中心间的欧氏距离小于辐射因子为准则进行类别合并,自动得到初始聚类中心和聚类数目,最后通过改进K-Means算法完成聚类分选。仿真实验表明:所提方法能够应对存在频率捷变,重频参差、抖动、参数交叠、局部脉冲丢失的复杂信号环境,分选正确率明显提升。     

基于积分分离式PID控制的耕深调节系统研究

耕作过程中保持耕深稳定是提高耕作质量的重要措施之一.以小型耕耘机的后悬挂旋耕部件为研究对象,提出了一种基于积分分离式PID控制的耕深自动测量和调节的系统,采用双倾角传感器检测耕深,消除了田块自身与绝对水平面倾角的误差影响,通过在误差信号的处理中使用积分分离式PID控制算法,利用Simulink中的SimHydraulic模块对耕深控制系统进行动态仿真研究,与未加入PID控制算法时的仿真结果进行比较,发现几乎消除了系统的耕深超调现象.同时,将响应时间由4.0s左右缩短到1.4s左右,使耕深控制系统的动态响应达到较好的效果.田间试验结果表明,当耕深设定为10cm和16cm时,实测耕深稳定性变异系数分别为6.05%和3.54%,均低于10%,达到了农业机械作业标准所规定的旋耕作业农艺要求.