基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

检测陀螺仪转子安装精度的一种新方法

陀螺仪转子的安装精度对其运行的稳定性和精确性有很大的影响。由于要求的安装误差很好，因此，对其误差的测量要求准则。其测量误差应经安装误差小1／10以及上，一般的检测方法很难达到要求，为此介绍了一种新型的光电检测方法，该方法利用狭缝的光学傅立叶变换提取陀螺仪转子的误差信息，采用计算机进行信息处理，从而完成陀螺仪转子的自动检测和分类，该方法也可用于其他一些精密年的自动检测处理。     

传染病医院污水处理工艺选择案例

文章通过对临汾市传染病医院拟建的传染病区污水的来源、排放量、污染物的分析,结合污水处理原则,提出了具体的污水处理工艺。并根据污染物去除率预测了污染物浓度,与污染物排放标准进行对比分析,结果表明所选工艺处理后的污染物浓度能够达标,污水处理工艺是可行的。     

识别混凝土板内部缺陷的人工神经网络算法

以一维有缺陷混凝土板为研究对象，分别采用Leverberg-Marcluardt和径向基神经网络算法，对缺陷的深度与厚度进行识别，从而实现对混凝土板内部缺陷的三维重构，称为红外CT模拟．两类神经网络算法的识别结果表明：Leverberg-Marcluardt神经网络较径向基神经网络具有更好的收敛精度与计算效率．     

地方性氟中毒流行病及在我国的流行特征

地方性氟中毒是一种在全球流行的地方病。本文介绍了其概念、研究史和研究现状,探讨了地氟病的病理学特征及病区的成因,并初步分析了地氟病在人群中的分布规律及在我国的地理流行特征。     

热轧圆钢外径的激光在线检测研讨

本文报导热轧圆钢激光在线检测外径的阶段性研究结果，给出仪器研制原理及光机结构设计同仪器精度关系的研讨．     

一种基于数字水印的错误检测和定位技术

为了增强视频通信系统在有误码信道的适应能力 ,提出了一种基于数字水印技术的错误检测方法 ,使得解码器可以对误码块进行有效的补偿。其原理为编码器在量化后离散余弦变换 (DCT)系数中嵌入易碎的数字水印 ,解码器可以通过提取水印从而确认错误以及错误发生的首宏块位置。仿真结果证明 :在信道误码率为 5× 10 - 4时 ,与常用的基于语法的方法相比 ,本方法的错误检测率是其的 1.32～ 1.82倍 ,错误正确定位率是其的 2 .95～ 5 .32倍 ,而且 PSNR只有微弱降低 ,同时算法复杂度很低     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

无缝线路缓冲区病害分析及根治措施

概述了缓冲区养护中存在的问题,分析了无缝线路缓冲区病害的成因,提出了治理病害的针对性措施.