基于共价有机框架的仿生光动力学治疗试剂的构建

共价有机框架（COF）是一类新兴的多孔有机聚合物，因其具有较大的比表面积、有序的孔道结构以及良好的生物相容性，已成为具有潜力的纳米药物载体.制备了基于COF纳米颗粒的仿生纳米复合物，负载光敏剂孟加拉玫瑰红（RB），并包裹癌细胞膜（CMV）对该复合物进行仿生修饰.结果表明：制备的COF/RB@CMV纳米复合物具有良好的生物兼容性，能够被肿瘤细胞有效摄取，并在光照激活条件下产生对细胞具有高毒性的活性氧化物（ROS），进而起到了杀伤肿瘤细胞的作用.提出了一种新的基于COF的仿生纳米平台用作光动力学治疗（PDT）试剂.     

Key technologies for polymer electrolyte membrane fuel cell systems fueled impure hydrogen

Hydrogen energy and polymer electrolyte membrane (PEM) fuel cells become concerned issues in recent years. Nevertheless, the construction of hydrogen refueling infrastructure and hydrogen storage and transportation constrains the commercial development of fuel cells. In this review, sources, production, storage, transportation, and purification methods of hydrogen are extensively reviewed and compared. The advantages of utilizing industrial by-product hydrogen and steam reforming gas in PEM fuel cell systems are analyzed. Using industrial wasted hydrogen can significantly reduce the cost of hydrogen. Also, it is indicated that the onboard hydrogen generation by steam methanol reforming can solve the difficulties of efficient storage and transportation of gaseous hydrogen, which means that methanol has great potential to be a convenient carrier of hydrogen. The effects of impurities contained in the reformate gas are generally introduced. After the methanol steam reforming and pretreatment purification processes, the reformate gas can be fed to PEM fuel cells. Thus, a fuel cell system integrated with onboard hydrogen production and impure hydrogen treatment subsystems is introduced, and key technologies therein for pretreatment purification and in-situ poisoning mitigation methods are reviewed. Finally, suggestions are proposed for further studies.     

Janus few layered graphene with asymmetric wettability as anti-flooding cathode supports in proton exchange membrane fuel cells

Water balance in cathode catalyst layer (CCL) is crucial for proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel strategy to develop a Janus few layered graphene particles (FLGP) with asymmetric wettability by varying the carbon precursors in the chemical vapor deposition (CVD) process. Using the Janus FLGP supported Pt with asymmetric wettability as the cathode of a PEMFC, a peak power density of 632 mW cm⁻² was achieved, which was about two-folds of the hydrophobic FLGP and three-folds of hydrophilic FLGP based cathode, respectively. The enhanced performance could be ascribed to the well-constructed three-phase boundary in an anti-flooding cathode, leading to enlarged electrochemical active surface area and facilitated mass transfer. This work may provide new clues for improving water management in PEMFCs.     

高性能膜分离材料、膜过程强化关键技术及装备的研制与应用

针对影响和制约膜分离技术大规模推广应用的关键材料与技术瓶颈,中国科学院过程工程研究所"生化工程介质与设备"创新团队经过多年自主创新,在高性能分离膜材料、膜过程强化关键技术和高效膜分离装备等方面取得了系列科研成果,部分成果在调味品、水处理、中药等行业实现了产业化应用,创造了显著的经济效益和社会效益,为提高我国膜工业研发与应用水平,缩短我国膜分离行业与国外先进水平之间的差距,促进膜分离技术的大规模工业化应用做出了贡献。     

聚偏氟乙烯/磷酸化纳米二氧化硅螯合金属锆杂化膜

结合原位合成法和相转化法,利用正硅酸乙酯(TEOS)和硅烷偶联剂3氨丙基三乙氧基硅烷(APTES)改性制备聚偏氟乙烯(PVDF)/氨基化纳米二氧化硅(NH 2-SiO 2)杂化膜,然后通过磷酸化处理,固定螯合金属锆(Zr),从而提高杂化膜对卵清蛋白的吸附能力,同时改善了杂化膜的亲水性能。当TEOS质量分数为8%时,改性后的磷酸化Zr+PVDF/NH 2-SiO 2杂化膜对卵清蛋白吸附量达到最大,为150.7 mg/g,且其经过4次吸附洗脱重复循环后对卵清蛋白的解吸附率保持在80%以上,显示该杂化膜具有良好的重复吸附和解吸附能力。     

A new microfiltration membrane with three-dimensional reticular architecture for Nano-pollutants removal from wastewater

This research provides a new insight into designing next-generation filtration materials for Nano-pollutants removal from wastewater, and potentially for gas/solid or liquid/solid separation in corrosive environment. Considering the high corrosion and oxidation resistance, Ti–40Al–10Nb–10Cr porous alloy was prepared by powder metallurgy and used as a mechanical support with a pore size of around 10 ?μm. Subsequently, metallic Zn nanoparticles was coated on the Ti–40Al–10Nb–10Cr porous framework by means of chemical vapor deposition, obtaining a novel microfiltration membrane with three-dimensional reticular architecture. Furthermore, the influence of Zn coating on surface morphology, pore feature, and filtration capability of Ti–40Al–10Nb–10Cr porous alloy was investigated. It is of note that the as-prepared microfiltration membrane exhibits an excellent Nano-pollutants filtration efficiency of greater than 99.989% from wastewater. Most importantly, such a three-dimensional reticular architecture provides excellent structural stability, allowing the reutilization of the microfiltration membrane for at least 200 filtration cycles of wastewater treatment.     

面向控制的一维非等温两相流燃料电池模型研究

经验模型不能反映电池内部复杂的物理化学耦合过程及其导致的响应迟滞,这给燃料电池系统精确控制策略的开发带来了一定困难。针对此问题,建立了面向控制的一维非等温两相流模型,考虑了流道内气体瞬态效应、电池内部水相变,研究了电流密度对气体浓度以及水热分布特性的影响,分析了运行条件和模型参数对电池输出电压的影响,探究了电流阶跃下该模型相比于集总参数模型在输出性能方面的优势。结果表明,该模型具有更好的适用性,可为燃料电池系统层面的模型优化及控制策略设计提供可靠依据。     

噪声下基于耳蜗基底膜分频特性的声源定位

在人与人交流中,人耳能很好地定位出周围声音的位置,而在声源定位技术里,基于传统麦克风声源定位在噪声环境下无法精确地定位出声源.根据人耳能准确地辨别出声源这一特性,提出一种在噪声下基于人耳耳蜗基底膜分频特性的声源定位方法.该方法是利用多个麦克风对声源信号进行采集,将采集到的信号通过基底膜滤波器进行滤波、除去与声源无关的噪声,运用空间映射互相关方法对声源进行定位.该方法所定位出的声源位置比传统声源定位技术所定位的位置误差小、精准度高.实验结果表明,噪声环境下基于耳蜗基底膜分频特性的声源定位比基于传统麦克风声源定位技术更接近声源的真实位置;噪声环境下基于耳蜗基底膜分频特性的声源定位具有更高的精度与更好的鲁棒性.     

含镍废水的隔膜电解法回收工艺研究

以含有一定浓度硼酸的含镍电镀废水作为阴极液,2％的NaOH水溶液为阳极液,阴离子交换膜为隔膜材料组成隔膜电解装置,对含镍电镀废水进行了回收工艺研究。考察了电解时间、电流密度、pH值、温度及硼酸浓度对镍回收率的影响。结果表明,延长反应时间、提高电解温度、增加硼酸浓度有利于提高回收率。在电流密度为300 A／m2,pH=4,温度为35℃,硼酸浓度为25 g／L的最佳工艺条件下电解6 h,镍的回收率高达96.64％,所得镍为松枝状结构电解镍,纯度为94.69％。