首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   1584篇
  免费   140篇
  国内免费   55篇
系统科学   9篇
丛书文集   32篇
教育与普及   1篇
理论与方法论   2篇
现状及发展   11篇
综合类   1724篇
  2024年   1篇
  2023年   20篇
  2022年   26篇
  2021年   26篇
  2020年   19篇
  2019年   29篇
  2018年   21篇
  2017年   46篇
  2016年   62篇
  2015年   73篇
  2014年   80篇
  2013年   64篇
  2012年   100篇
  2011年   102篇
  2010年   75篇
  2009年   101篇
  2008年   68篇
  2007年   114篇
  2006年   102篇
  2005年   89篇
  2004年   66篇
  2003年   79篇
  2002年   51篇
  2001年   57篇
  2000年   50篇
  1999年   34篇
  1998年   18篇
  1997年   20篇
  1996年   26篇
  1995年   28篇
  1994年   23篇
  1993年   18篇
  1992年   15篇
  1991年   12篇
  1990年   14篇
  1989年   20篇
  1988年   11篇
  1987年   12篇
  1986年   4篇
  1985年   1篇
  1984年   1篇
  1955年   1篇
排序方式: 共有1779条查询结果,搜索用时 15 毫秒
1.
The mass transfer among the multiphase interactions among the steel, slag, lining refractory, and nonmetallic inclusions during the refining process of a bearing steel was studied using laboratory experiments and numerical kinetic prediction. Experiments on the system with and without the slag phase were carried out to evaluate the influence of the refractory and the slag on the mass transfer. A mathematical model coupled the ion and molecule coexistence theory, coupled-reaction model, and the surface renewal theory was established to predict the dy-namic mass transfer and composition transformation of the steel, the slag, and nonmetallic inclusions in the steel. During the refining process, Al2O3 inclusions transformed into MgO inclusions owing to the mass transfer of [Mg] at the steel/refractory interface and (MgO) at the slag/re-fractory interface. Most of the aluminum involved in the transport entered the slag and a small part of the aluminum transferred to lining re-fractory, forming the Al2O3 or MgO·Al2O3. The slag had a significant acceleration effect on the mass transfer. The mass transfer rate (or the re-action rate) of the system with the slag was approximately 5 times larger than that of the system without the slag. In the first 20 min of the re-fining, rates of magnesium mass transfer at the steel/inclusion interface, steel/refractory interface, and steel/slag interface were x, 1.1x, and 2.2x, respectively. The composition transformation of inclusions and the mass transfer of magnesium and aluminum in the steel were predicted with an acceptable accuracy using the established kinetic model.  相似文献   
2.
以页岩陶粒混凝土为基础配方,系统研究了单掺和双掺不同含量的偏高岭土、粉煤灰、钢渣等矿物掺合料对其抗压强度影响,通过SEM和XRD进行了相关的微观结构和组成分析.结果表明当单掺矿物掺和料质量分数为10%时,页岩陶粒混凝土达到最高的抗压强度;双掺和时,总掺量为10%(质量分数)、比例为1∶2的偏高岭土和粉煤灰时,页岩陶粒混凝土的抗压强度最好,其3d、7d和28d的抗压强度分别达到了18.1、28.6和35MPa,对比没有加入矿物掺合料的页岩陶粒混凝土的抗压强度分别增加了417%、267%和250%,主要原因是偏高岭土和粉煤灰的掺加能够优化轻骨料混凝土的微观结构,对强度具有较大贡献.  相似文献   
3.
研究采用ZnCl2活化农业秸秆废弃物的方法制备高比表面积的生物质炭(BACs),以实现室温下高效吸附气态甲醛。工业分析和元素分析表明所用农业秸秆是适宜的BACs前体物,且比表面积、扫描电镜、傅里叶红外光谱和热重分析结果表明BACs能够实现理想吸附效果。系统性实验探究了活化条件、O2和气态甲醛浓度对BACs吸附性能的影响,结果表明,ZnCl2/RPm质量比、活化温度和时间对吸附性能有显著的正向影响,而O2对吸附性能有抑制作用;随着HCHO浓度的增加,BACs的吸附性能单位时间内损失率增大。对饱和BACM(玉米秸秆提取的BAC)进行脱附和再生试验,结果得出,解吸温度均在50 ℃以上,能够保证室内使用安全;饱和BACM经再生后,仍表现出较好的吸附性能,表明该吸附剂可重复利用。  相似文献   
4.
针对高铝粉煤灰拜耳法溶出渣进行了脱碱工艺研究,考察了[n(C)/n(S)](CaO与SiO2物质的量比)、反应温度、反应时间、液固比及体系碱浓度等对脱碱的影响,同时考察了脱碱过程对氧化铝溶出率的影响.结果表明:添加石灰的方式可以实现高铝粉煤灰拜耳法溶出渣中氧化钠的脱除,并回收部分氧化铝;反应温度对氧化钠和氧化铝回收率均造成显著影响,而[n(C)/n(S)]仅对氧化钠的溶出率影响较大;在温度260℃、氧化钠质量浓度小于80g/L、液固比4、[n(C)/n(S)]为1.8、反应时间2h条件下,脱碱率为91.2%,氧化铝回收率为28.0%;拜耳渣脱碱过程物相由水合铝硅酸钠向水化石榴石及铁水化石榴石转变.  相似文献   
5.
At low basicity and low temperature, the dephosphorization behavior and phosphorus distribution ratio (LP) between slag and molten steel in the double slag and remaining slag process were studied with a 180 t basic oxygen furnace industrial experiment. The dephosphorization slags with different basicities were quantitatively analyzed. At the lower basicity range of 0.9–2.59, both LP and dephosphorization ratio were increased as the basicity of dephosphorization slag increased. Dephosphorization slag consisted of dark gray P-rich, light gray liquid slag, and white Fe-rich phases. With increasing basicity, not only did the morphologies of different phases in the dephosphorization slag change greatly, but the area fractions and P2O5 content of the P-rich phase also increased. The transfer route of P during dephosphorization can be deduced as hot metal → liquid slag phase + Fe-rich phase → P-rich phase.  相似文献   
6.
研究了环境雌激素壬基酚(NP)对剩余污泥厌氧发酵产酸的影响,并利用宏基因组测序手段分析影响机制。NP促进污泥厌氧发酵产酸,随NP含量的提高,该促进作用呈先增加后减少的趋势。当NP含量为200 mg·kg-1干污泥时,污泥发酵产生的短链脂肪酸(SCFAs)达最大值,为空白组SCFAs产量的2倍,乙酸产量为空白组的3倍。基于宏基因组学的机理研究表明,NP导致不利于SCFAs积累的耗酸微生物有所削减,产酸微生物大量积累。NP存在时,以葡萄糖为底物的糖酵解、以氨基酸为底物的脱氨基和以脂肪酸为底物的β氧化过程功能基因相对丰度提高;单糖和氨基酸等有机底物由胞外向胞内运输的腺苷三磷酸结合盒转运蛋白、运输至胞内的有机底物向SCFAs代谢转化的双组分系统及胞内产生的SCFAs外排转运蛋白的相关功能基因丰度大幅提高。最后,NP引起了与细胞生长和保护机制密切相关的群体感应调控的生物膜合成基因丰度显著提升。  相似文献   
7.
采用超声波处理活性污泥,利用其释放出的有机质作为电子供体.摇瓶实验表明,喹啉的生物降解速率与处理或未处理的污泥量成正比,将25%未处理污泥和75%处理过的污泥混合用于降解喹啉时,喹啉的降解速率最快.在此过程中,处理的污泥主要起着电子供体的作用,而未处理的污泥主要起着生物催化剂的作用.对喹啉生物降解过程进行电子平衡计算,结果表明,18 m L处理污泥的上清液作为电子供体相当于3.65 mmol/L草酸的作用.  相似文献   
8.
不同C/N对活性炭颗粒填料厌氧同步消化反硝化的影响   总被引:1,自引:0,他引:1  
构建以粒径3~6 mm活性炭颗粒为填料的厌氧污水处理系统,厌氧消化菌和反硝化菌在活性炭颗粒表面附着成膜,考察不同C/N对厌氧同步消化反硝化的影响。以葡萄糖为有机碳源,进水中葡萄糖质量浓度分别为300 mg·L-1和400 mg·L-1时,较高C/N对NO-3-N去除有利,最高去除率为95.21 %;较低C/N对COD和NH+4-N的去除有利,最高去除率分别达到96.00 %和42.43 %以上。研究表明,以活性炭颗粒为填料的厌氧高效处理废水技术是可行的,不同C/N对厌氧同步消化反硝化处理含氮和有机物废水具有较明显的影响。  相似文献   
9.
To extract vanadium in an environment friendly manner, this study focuses on the process of leaching vanadium from vanadium slag by high pressure oxidative acid leaching. Characterizations of the raw slag, mineralogy transformation, and the form of leach residues were made by X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The result shows that the vana-dium slag is composed of major phases of fayalite, titanomagnetite, and spinel. During the high pressure oxidative acid leaching process, the fayalite and spinel phases are gradually decomposed by sulfuric acid, causing the release of vanadium and iron in the solution. Meanwhile, unreacted silicon and titanium are enriched in the leach residues. With the initial concentration of sulfuric acid at 250 g·L?1, a leaching tem-perature of 140°C, a leaching time of 50 min, a liquid–solid ratio of 10:1 mL·g?1, and oxygen pressure at 0.2 MPa, the leaching rate of vana-dium reaches 97.69%.  相似文献   
10.
通过对差示扫描量热(DSC)曲线的分析,建立了渣膜结晶比计算模型。利用配制已知结晶比的标样,考察了差热分析法确定渣膜结晶比的准确性,并在实验室对工业用中碳钢和低碳钢板坯保护渣制备的渣膜结晶比进行了测定。结果表明:差热分析测量再结晶热焓的方法可以用于渣膜结晶比的判定,相对误差为0~5.03%;用于连铸中碳钢的保护渣渣膜结晶比为88.6%,而低碳钢保护渣的渣膜结晶比为55.0%,其大小趋势与实际要求一致。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号