On the Circulant and Aperiodic Models of Deconvolution

ＯｎｔｈｅＣｉｒｃｕｌａｎｔａｎｄＡｐｅｒｉｏｄｉｃＭｏｄｅｌｓｏｆＤｅｃｏｎｖｏｌｕｔｉｏｎ￥ＺｏｕＭｏｕｙａｎ＆ＲｏｌｆＵｎｂｅｈａｕｅｎＡｂｓｔｒａｃｔ：Ｔｈｅｐｏｐｕｌａｒｌｙｕｓｅｄｃｉｒｃｕｌａｎｔｍａｔｒｉｘｍｏｄｅｌｏｆｄｅｃｏｎｖｏ...     

Estimation and testing of time-varying coefficient regression models in the presence of linear restrictions

A linear regression model with random walk coefficients is extended to allow for linear restrictions between the coefficients to be satisfied at each point in time. Estimation in this model is shown to be no more involved than estimation in the standard model. It is also demonstrated how, after a slight modification to the testing problem, classical test procedures may be applied to the problem of testing for such restrictions. The performance of the Lagrange Multiplier test for a variety of different restrictions is then investigated via simulation. An empirical application involving testing for homogeneity in a random walk coefficient version of the AIDS model is given.     

磁致伸缩换能器的编、查表计算法

本文简述定义两个新系数对Camp公式进行变换,以编制磁致伸缩换能器谐振尺寸和频率设计计算用表的方法,分别举例说明利用该表进行考虑修正和不考虑修正的换能器计算的方法。     

高等师范学生教师职业技能训练及培养模式新论

高等师范学生的教师职业技能训练,自国家1995年《教师资格条例》颁布以来,虽在全国有关高校一度出现好的势头,但很快被我国高校扩招的形势冲淡了,目前情况令人担忧。因此,在我国高等教育发展的新形势下,从宏观上构建高等师范学生教师职业技能培养模式应是当务之急。     

高频MOS－CV特性的界面态形变及其测量

讨论了工艺过程中产生的界面态陷阱电荷Ｑ（ｉｔ）对高频ＭＯＳ－ＣＶ特性线的形变规律，提出了一种沿电压方向形变的数据处理方法，以此算出Ｑ（ｉｔ）密度在禁带中的分布，并对常规高频ＣＶ法的测量误差作了讨论和修正，由于数据的采集和处理可以由微机完成，使这种方法变得简便、准确并易于在工艺线上推广使用。     

The Development and Application of Combined Thermoregulatory Mathematical Models

Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the "engineering-physiological" thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.     

催化重整生焦动力学模型的研究 I.生焦动力学模型的建立

在催化重整１６集总动力学模型的基础上,假设同类反应的失活函数是相同的,建立了生焦动力学模型。在排除了内外扩散等影响因素的前提下,确定了催速生焦失活反应条件和催化剂活性评价条件,使在实验室进行生焦动力学模型的研究成为可能。     

透射焦散线法研究甲板开口边缘Ⅰ型裂纹的应力强度因子

为研究船舶甲板开口边缘受拉的Ⅰ型裂纹的应力强度因子,并探索焦散线方法在船舶结构中的应用,采用透射焦散线方法进行了实验研究．实验中模拟一般散货船带舱口的上甲板,制作了带孔有机玻璃透明试件,并采用加热法开出孔边裂纹．在数字焦散线实验系统中进行实验,获得了清晰的全场焦散线数字图象．应用焦散线图象自动处理程序精确地测出焦散线的最大直径以计算应力强度因子,并对裂纹尖端初始焦散线引起的实验误差作了处理．实验结果与理论值十分接近,表明船舶甲板开口边缘受拉的Ⅰ型裂纹的应力强度因子与甲板中的总纵拉力成正比．     

Solutions of Two-point BVP in Banach Spaces

IntroductionGuoetal.[1]discussedthetwo-pointboundaryvalueproblem(BVP)forordinarydifferentialequationsinBanachspaces,-u″=f(t,u),　t∈I=[0,1]u(0)=u(1)=0andgavesomeconclusions.Usingthemonotoneiterationtechnique,SongFumindiscussedthesameBVP[1]andshoweditsmaximalandminimalsolutions[2].Inmoregeneralboundaryvaluecondi-tions,GuoandSun[3]discussedBVPinreflexiveBanachspacesandmadeseveralconclusions.InthisworkthefollowingBVPinrealBanachspace,E,isconsidered.Lu(-p(t)u′)′ q(t)u=f(t,u),B0uau(0)-…