Maxwell's role in turning the concept of model into the methodology of modeling

This is a contribution towards a history and philosophy of modeling in its early stages in electromagnetism. In 1873, James Clerk Maxwell (1831–1879) hinted at the methodology of modeling at the end of his Treatise on Electricity and Magnetism. We focus on Maxwell's impact on physicists who immediately followed him, specifically Oliver Lodge (1851–1940) and George Francis FitzGerald (1851–1901). We begin with the role that the scientific concept of model played in the late nineteenth century, as assessed by Ludwig Boltzmann (1844–1906). We then discuss the role of hypothesis as a methodology, the appeal to (dynamical) illustration, and the way Maxwell applied model and working model in his studies of electromagnetism. We show that for Maxwell these key terms were kept distinct, but Lodge did not maintain these distinctions and, in this regard, FitzGerald followed Lodge. Notwithstanding Lodge's influence, Fitzgerald modified Maxwell's theory based on the mechanical model he designed, thereby implicitly taking the first step towards modeling. This methodology consists in drawing consequences from the (mechanical) model to the (electrodynamic) theory and modifying the latter in light of the functioning of the former. At the core of our argument is the thesis that it was a methodological novelty to move from the concept of model to the methodology of modeling. The introduction of modeling as a new methodology into physics in the late nineteenth century was a major event which deserves proper recognition.     

Zr-xNb-4Sn alloys with low Young’s modulus and magnetic susceptibility for biomedical implants

The microstructure, mechanical and magnetic properties of Zr–x (8, 9, 10, wt.%)Nb–4Sn alloys were investigated to obtain novel Zr-based alloy with low Young’s modulus and magnetic susceptibility for biomedical implants. After homogenization annealing, hot forging and solution annealing, Zr–8Nb–4Sn, Zr–9Nb–4Sn and Zr–10Nb–4Sn alloys were composed of β+α″ phase, β+α″ phase, β+ω phase, respectively. The temperature at which the α" and ω phase were transformed into β phase during the heating process was about 200 ​°C, and the phase transformation temperature decreased with the increase of Nb element. Among all the Zr–x (x ​= ​8,9,10)Nb–4Sn(wt.%) alloys, Zr–9Nb–4Sn alloy had the lowest Young's modulus of 46.6 ​GPa and the low magnetic susceptibility of 1.294 ​× ​10⁻⁶ cm³g⁻¹, which has a good application prospect for biomedical applications.     

Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Microstructure and mechanical properties of Cr doped WCoB based cermets by spark plasma sintering and first principle calculation

WCoB based cermet is a potential hard alloy to replace WC-Co cermets with high hardness and corrosion resistance. WCoB based cermets with different Cr doping contents were fabricated by spark plasma sintering in liquid phase sintering stage. The densification behavior, phase composition, microstructure and mechanical properties of Cr doped WCoB cermets were investigated by XRD, EDS and SEM. Due to the lower density of Cr,the density of WCoB cermets decreased with the increasing of Cr doping content. The phase composition consisted of Cr doped WCoB, unreacted W, Co–Cr binary binder phase. When the doping content exceeded11.736 wt%, the Cr enrichment zones appeared, which was harmful to the TRS. The increasing of Cr doping content contributed to the increase of unreacted W phases content and the formation of pores. The maximum value of Vickers hardness was 1751 Hv0.5 at 9.356 wt% Cr doping content. The variation trend was explained by first principle calculation, which is consistent with Hv-Zhou hardness model.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

消费社会视野下诚信问题研究

中西方传统诚信观有着深刻的社会背景与文化渊源。目前,我国消费领域诚信缺失现象严重,因此,必须从加强公民道德教育,完善公民、企业和其他组织的诚信系统,建立健全信用法律和制度,强化政府监督职能,规范公民和组织的诚信行为,维护社会信用秩序等方面入手加强诚信建设。     

Effect of equal channel angular pressing on aging treatment of Al-7075 alloy

The effect of aging treatment on microstructure and mechanical properties of equal channel angular pressed Al-7075 alloy was examined.Commercial Al-7075 alloy in the solid solution heat-treated condition was processed by equal channel angular pressing through route BCat both the room temperature and 120 1C. Only three passes of equal channel angular pressing was possible due to the low ductility of the alloy at both temperatures. Followed by equal channel angular pressing, the specimens have been aged at 120 1C for different aging times. Mechanical properties were measured by Vickers microhardness and tensile tests and microstructural observations were undertaken using transmission electron microscopy, X-ray diffractometer as well as optical microscopy. Microstructural investigations showed that ultrafine-grained materials with grain size in the range of 200–350 nm and 300–500 nm could be obtained after three passes of equal channel angular pressing at room temperature and 120 1C, respectively. Equal channel angular pressing of solid solution heat-treated Al-7075 alloy accelerates precipitation rate and subsequently leads to a significant decrease in aging time to attain maximum mechanical properties. Furthermore, it is possible to achieve maximum mechanical properties during equal channel angular pressing at 120 1C as a result of dynamic aging and formation of small η′ phase.     

基于力学咬合的楔形腔锥形光纤耦合封装结构研究

对楔形腔光场传输模式进行对比分析,改变MEMS工艺参数,加工出楔角外侧下边缘带有"齿"的10°楔角楔形腔;设计光纤架与壳体,采用力学咬合的方式,对锥形光纤耦合位置进行固定,实现力学无胶封装,消除了封装材料性能退化对倏逝场产生的破坏,获得了稳定的倏逝场耦合模式,进而得到稳定的高品质因数(Q);封装前后楔形腔倏逝场耦合模式改变微小,Q值不随时间产生退化。使用高速转台对封装结构进行稳定性测试,5g离心转动前后,楔形腔与锥形光纤耦合位置不变。     

基于可信第三方的Android应用完整性验证模型

提出一个基于可信第三方的Android应用完整性验证模型.采用特征选择算法、XML解析和反编译来获取Android系统完整性信息,终端通过与可信第三方进行验证来保证应用的完整性.对比实验结果表明了系统的有效性和可行性.