路基非饱和土动态回弹模量计算模型对比研究

作为路面结构设计的关键参数,对动态回弹模量的可靠计算一直是工程界不断探索的课题。本文收集并分析国内外已有关于路基土回弹模量的计算模型,根据自变量的不同属性,将计算模型归为两大类,第一类为将应力水平作为变量(I型),第二类是将表征湿度状态的基质吸力作为变量,这其中又分为两个子类,一是将基质吸力引入耦合到应力变量中(II1型)；二是将基质吸力剥离出来作为独立变量(II2型)。然后结合2种土样的循环动三轴试验数据,对3类计算模型的可靠性及适用性进行对比评价。结果表明：将基质吸力作为单独变量(II2型)的计算模型能更真实的反映非饱和路基土动态回弹模量的变化规律,拟合度较高。     

基于规则分组的DFA正则表达式匹配算法

模式匹配因误报率低和漏报率低被入侵检测所采用.在使用正则表达式构造DFA时,因状态爆炸导致匹配算法需要较多的存储空间和运行时间,算法效率低下,采用规则分组后,可以在一定程度上抑制状态爆炸问题.根据缓存中的历史记录对正则表达式进行分组,既能利用规则分组减少状态总数,抑制状态爆炸,又能减少因每次重新构建DFA所带来的开销,提高了匹配效率,有利于提高入侵检测的实时性、准确性和高效性.     

用于联盟链的布隆过滤器优化

布隆过滤器常用于联盟链Hyperledger Fabric状态数据库LevelDB的读性能优化，但布隆过滤器本身存在误报现象，且LevelDB只能对布隆过滤器进行统一配置而无法自适应调整。为此，提出一种单元化的部分计数式布隆过滤器（partial counting Bloom filter,PCBF）构造方案，设计可并行计算的元素插入与查询机制并结合双重哈希及非加密哈希来实现快速插入与查询；基于开启过滤器单元与访问次数构建排序字符串表优先级，使用时间片轮询算法对过滤器单元进行自适应调整，实现了资源的合理分配。实验结果表明： PCBF具有较高的插入效率，并能减少20%左右的误报数量，适用于联盟链的高并发场景。     

科技创新、科技产业与科技金融时空耦合分析

选取我国30个省市2008～2017年的面板数据,利用科技创新、科技产业和科技金融三系统耦合协调度模型进行测算,针对各省市三系统耦合协调度进行空间相关性检验.结果显示,我国科技创新、科技产业与科技金融整体处于中度耦合协调水平,且时间上呈现出周期波动的特征,空间上呈现出"东高西低"的态势;长三角地区始终位于H-H区域,而西北地区位于L-L区域.得出如下建议,科技金融应形成支持科技发展的长效机制;地方政府应推出因地制宜的科技金融政策;中央政府应对低度耦合发展集聚的区域给予相应的优惠补贴和鼓励措施.     

Improving the photocatalytic activity of graphitic carbon nitride by thermal treatment in a high-pressure hydrogen atmosphere

Extending visible light absorption range and suppressing the recombination of photogenerated charge carriers are always important topics in developing efficient solar-driven photocatalysts. In this study, the thermal treatment process at 400 °C in a high-pressure hydrogen atmosphere was applied to modify graphitic carbon nitride. Compared to the normal atmospheric hydrogen treatment process, this process has the merit of producing nitrogen deficient graphitic carbon nitride in high-yield. The optimal photocatalytic activity of modified graphitic carbon nitride was demonstrated by controlling the treatment duration in the hydrogen atmosphere.The changes in the crystal structure, microstructure and optical properties of carbon nitrides were investigated by several characterizations. The relationship between the photocatalytic activity and structures of graphitic carbon nitride was preliminarily established. The results obtained in this study could provide some new ways of improving the activity of graphitic carbon nitride based photocatalyst.     

Uncoupled PID Control of Coupled Multi-Agent Nonlinear Uncertain systems

In this paper, PID (proportional-integral-derivative) controllers will be designed to solve the tracking problem for a class of coupled multi-agent systems, where each agent is described by a second-order high-dimensional nonlinear uncertain dynamical system, which only has access to its own tracking error information and does not need to communicate with others. This paper will show that a 3-dimensional manifold can be constructed based on the information about the Lipschitz constants of the system nonlinear dynamics, such that whenever the three parameters of each PID controller are chosen from the manifold, the whole multi-agent system can be stabilized globally and the tracking error of each agent approaches to zero asymptotically. For a class of coupled first-order multi-agent nonlinear uncertain systems, a PI controller will be designed to stabilize the whole system.     

Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing

Low-carbon steel plates were successfully subjected to normal friction stir processing(NFSP) in air and submerged friction stir processing(SFSP) under water, and the microstructure, mechanical properties, and corrosion behavior of the NFSP and SFSP samples were investigated. Phase transformation and dynamic recrystallization resulted in fine-grained ferrite and martensite in the processed zone. The SFSP samples had smaller ferrites(5.1 μm), finer martensite laths(557 nm), and more uniform distribution of martensite compared to the NFSP samples. Compared to the base material(BM), the microhardness of the NFSP and SFSP samples increased by 19.8% and 27.1%, respectively because of the combined strengthening effects of grain refinement, phase transformation, and dislocation. The ultimate tensile strengths(UTSs) of the NFSP and SFSP samples increased by 27.1% and 38.7%, respectively. Grain refinement and martensite transformation also improved the electrochemical corrosion properties of the low-carbon steel. Overall, the SFSP samples had better mechanical properties and electrochemical corrosion resistance than the NFSP samples.     

干、湿大气环流模式中地表增温的经向分布及其机制

使用耦合了平板海洋的三维大气环流模式, 探究理想条件下极地增温放大现象的产生机制。实验中关闭海冰和云的辐射效应, 固定地表反照率, 并将海洋经向热量输送设置为零。通过控制地表蒸发的有无, 模拟湿大气和干大气两种情形。模拟结果显示, CO₂浓度加倍后, 湿大气环流模式中存在极地增温放大的现象, 而干大气环流模式中不存在这种现象。在干大气环流模式中, 地表增温幅度基本上不随纬度变化, 即均匀增温。湿大气环流模式中, CO₂浓度加倍导致的直接辐射强迫和水汽反馈导致的辐射效应都是热带比极地更强, 唯一能够解释湿大气中极地增温放大原因的是从赤道向极地的大气能量传输增强。在干大气环流模式中, 从赤道向极地的热量输送及其变化比湿大气弱很多, 因此无法支持极地增温放大现象。干大气中的均匀增温是CO₂的直接辐射强迫和普朗克效应相互竞争的结果。研究结果表明, 与水汽相关的经向热量输送是地球极地增温放大的关键因素, 而在基本上没有水汽的火星上, 可能不会出现极地增温放大现象。     

中国西北干旱区过度灌溉绿洲的水分收支特征研究

基于水分收支平衡原理, 观测2012年生长季张掖绿洲的水分收支分量动态特征, 探究灌溉对绿洲水分收支的影响。结果表明: 1) 无降水及灌溉时, 绿洲内40~100 cm深度的土壤含水量高 0~20 cm的土壤, 强降水事件对0~20 cm的土壤含水量影响较大, 而灌溉事件对 0~100 cm的土壤含水量有明显影响; 2) 无降水及灌溉时, 绿洲的日均蒸散发(ET)为2.83 mm/d, 降水事件后3日蒸散发量为降水之前的 1.16倍, 灌溉事件之后2日蒸散速率为灌溉之前的1.88倍, 说明灌溉对绿洲的蒸散发影响更为显著; 3) 绿洲生长季水分收支收入项(降水和灌溉, P+I)中, 灌溉占89.7%, 水分支出项主要为深层渗漏(DP), DP/(P+I)为81%; 4) 2012年生长季绿洲灌溉需水量为213 mm, 实际灌溉量比灌溉需水量多出474 mm, 远远超出所需, 水资源浪费严重。