催化光度法测定甲醇

基于甲醇对K2S2O8与亮绿间的氧化裉色反应有强烈的负催化作用,从而建立了一种测定甲醇动力学光度新方法.该法的线性范围为8.0×10-6～4.0×10-4mol/L;检出限为2.7×10-6mol/L;对1.0×10-5mol/L甲醇溶液连续进行11次测定,相对标准偏差为4.2%.将该方法用于工业洒精样品中甲醇含量的测定,结果较为满意.     

一类时滞系统的模糊预测控制方法

对模糊控制和预测控制相结合的控制方法进行研究,提出了一种简单易于实现的模糊预测控制的组合方法.此方法将模糊控制的定性分析特点和预测控制的定量分析特点有效地结合起来,同时积分器的引入可以消除稳态偏差.仿真结果表明,该方法对控制作用的滞后时间不确定的系统十分有效.     

A NEW DESCRIPA NEW DESCRIPTOR OF AMINO ACIDS BASED ON THE THREEDIMENSIONAL VECTOR OF ATOMIC INTERACTION FIELD

QUANTITATIVE STRUCTURE ACTIVITY RELATIONSHIP (QSAR) IS A VERY IMPORTANT TOPIC FOR MANY SCIENTIFIC FIELDS AND CAN BE TERMED AS QUANTITATIVE SEQUENCE ACTIVITY MODELS(QSAM)[1] WHEN REFERRED TO THE RESEARCH ON RELATION- SHIPS BETWEEN STRUCTURES AND ACTIVITIES OF BIOLOGICAL MOLECULES, SUCH AS PROTEINS, AND NUCLEIC ACIDS. HOW- EVER, IT IS VERY DIFFICULT TO ESTABLISH A QSAM MODEL,…     

催化电位法测定人发中痕量碘

采用碱灰化法消解发样,于中性溶液中离心去除杂质,在酸性溶液中以催化电位法测定发碘含量,回收率达98.6％;变异系数(CV)为8.7％;测出中碘地区一个教学班20名男学生发碘平均含量为0.93μg/g,与文献报道相近。     

烟气分析在转炉冶炼过程中的应用研究

介绍转炉烟气分析控制系统,研究转炉烟气和炉气在冶炼过程中的变化规律,并开发烟气定碳模型。结论表明,在转炉冶炼过程中利用烟气成分的变化规律,可进行转炉炉况判断、终点判断和了解炉内反应过程。开发的烟气定碳模型对于含碳量低于0.12%的炉次,其控制精度为±0.02%,命中率为90%。     

脂肪腈结构与凝聚型性能之间定量关系的研究

借助于分子拓扑学探讨了脂肪腈的凝聚型性能与分子结构之间的关系，提出一个结构基础明确的定量关系式．对乙腈到二十一烷腈的计算结果表明，沸点、密度和折光指数的计算值都很接近实验值．应用这一定量关系，不仅能够合理表征脂肪睛结构与凝聚型性能的关系，而且有助于揭示物质结构与性能关系之间的奥秘。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

论艺术概括的基本方式和三个层次

艺术概括是塑造优秀文学形象的重要手段 ,它的基本方式是必须融会在个性书写过程中 ,以个性书写为形态。艺术概括包涵三个由浅入深的层次 ,即 ( 1)通过个性概括同类现象的共同特征 ;( 2 )通过个性深入揭示内在本质 ;( 3 )通过个性显示深广的社会意义。达到这三个层次 ,文学形象便可获得深厚的内在意蕴     

铅溴络合物极谱吸附波的研究

本文研究了铅溴络合物在高氯酸－磷酸－草酸介质中的极谱行为。确定底液组成为５％ＮａＢｒ－１１％ＨＣｌＯ４－５％Ｈ３ＰＯ４－０．８％Ｈ２Ｃ２Ｏ４。工作曲线线性范围为０－１５０μｇ／５０ｍｌ检测下限达０．０１μｇ／ｍｌ体系选择性好，应用于实际样品的测定，获得满意结果。     

QSTEM技术中晶面指数的模糊逼近

本文阐述了 QSTEM 技术中获得的晶面夹角值与晶面指数之间的位相关系,提出了测量值与理论值的隶属度,建立了测量值与晶面指数之间的模糊关系——矩阵 A,通过两个例子,说明了模糊逼近的具体方法以及参数 T、m 和算子 H 等的具体意义。