当量粘度法判断RF树脂粘合性能的探讨

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度，来间接判断RF树脂的粘合性能。在NaOH质量分数为0．25％、反应温度为25℃的条件下，分析得出在反应时间为5h、F／R=1．8时合成的RF溶液粘合性能较好。并对此试样进行红外光谱分析，分析结果与测当量粘度结果一致，说明当量粘度法问接判定RF树脂的粘合性能的可行性，对实际生产有一定的指导意义。     

The Application of Similarity Theory in Designing Large Deflection Buckling Spring-Piece

Large Deflection Buckling Spring-Piece (LDBSP) refers to the deformation of an end-fixed flat spring-piece under normal loadings. Plastic deformation usually appears in LDBSP.The static characteristic curve is very particular, because within its linear deflection region, the spring constant can be designed to be any value from minus to plus. With its obvious advantages of large liner deflection range, low spring constant, etc., the LDBSP has now been extensively applied to the exciting device, low-frequency shock absorbers and so on. The static characteristic curve of LDBSP belongs to the nonlinear problem of an arch with varying section. Therefore, it is difficult to obtain it theoretically. The formulae for designing LDBSP have not been set up yet. In this study,the authors apply similarity theory to analyze the liner deflection range A and the spring constant K, and derive the relationship of similarity criterion, finally obtain a set of formulae for designing LDBSP by model test and the least square method, which can be applied in engineering design.Through the research, it is proved that it is unnecessary to keep geometrical similarity of spring-piece shape. This fact extends the application scope of the formulae. The proposed formulae for designing LDBSP thereby can be applied for any dimensions within the range allowed.     

A Theoretical Approach for Estimating Fracture Toughness of Ductile Metals

Fracture toughness is very important when applying Damage Tolerance Design and Assessment Techniques. The traditional testing approach for obtaining fracture toughness values is costly and time consuming. In order to estimate the fracture toughness of ductile metals, the fracture mechanics theory, materials plastic deformation theory and materials constructive relationships are employed here. A series of formulae and a theoretical approach are presented to calculate fracture toughness values of different materials in the plane stress and plane strain conditions. Compared with test results, evaluated values have a good agreement.     

连续玻纤增强聚丙烯熔融浸渍过程降黏研究

将不同配比的高黏度聚丙烯与低黏度聚丙烯共混制备高低黏度树脂混配基体,旋转流变测试结果显示低黏度聚丙烯的加入显著降低了共混体系的黏度。以高低黏度聚丙烯共混物为热塑树脂基体,采用熔融浸渍方法制备连续玻纤增强聚丙烯热塑预浸带。研究发现随着低黏度聚丙烯含量的增加,热塑树脂基体的加工性能明显提高,预浸带制品的孔隙率及纤维断裂率逐渐降低。将各组预浸带模压成型后进行力学测试,结果显示低黏度聚丙烯的加入使层压板层间剪切强度、弯曲强度、拉伸强度均出现小幅度下降,而对冲击强度基本无影响。结合加工性能及力学性能,低黏度聚丙烯质量分数10%时共混物的综合性能最佳。     

Electrorheological effect of Ti-bearing blast furnace slag with different TiC contents at 1500℃

The electrorheological properties of CaO–SiO2–Al2O3–MgO–TiO2–TiC slags were investigated to enhance understanding of the effect of TiC addition on the viscosity, yield stress, and fluid pattern of Ti-bearing slags in a direct-current electric field. The viscosities and shear stresses of 4wt% and 8wt% TiC slags were found to increase substantially with increasing electric field intensity, whereas virtually no rheological changes were observed in the 0wt% TiC slag. The Herschel–Bulkley model was applied to demonstrate that the fluid pattern of the 4wt% TiC slag was converted from that of a Newtonian fluid to that of a Bingham fluid in response to the applied electric field; and the static yield stress increased linearly with the square of the electric field intensity.     

不允许卖空限制下跳扩散模型的动态均值-方差资产负债问题

研究了在不允许卖空情况下跳扩散模型的动态均值一方差资产负债问题。本文利用两个黎卡提方程构造出HJB方程的一个连续解V（t，x），然后验证这个解是方程的粘性解，并利用粘性解和识别定理得到了最优投资策略和有效边界。     

带有梯度超线性项抛物方程黏性解的比较原理

研究梯度具有超线性增长的完全非线性抛物方程问题,证明了具有超线性增长的半连续黏性上下解的比较原理的存在,并且把此结果延伸到单调抛物系统中。     

注塑制品顶件痕缺陷及其预防措施

通过分析注塑制品顶件痕缺陷产生的原因,从注塑成型工艺、模具设计、模具抛光工艺、钳工配模工艺方面就消除顶件痕提出了预防措施。     

落球法测定液体粘滞系数实验设备的操作技巧

通过对落球法粘滞系数测定仪的分析而获得实验误差来源，通过提高实验技巧而克服仪器的弊端，使小球沿容器中心轴线准确下落，从而提高了实验成功率。     

H型钢多道次粗轧工艺过程的数值分析

为了分析现有型钢轧制工艺的合理性,必须综合考虑轧件的微观组织演化、轧制力等多方面因素.为此,文中提出了针对H型钢多道次轧制过程的综合数值分析流程,通过热模拟实验和金相观测,建立轧件材料的高温屈服应力模型及奥氏体再结晶预报模型,并构建基于网格重构的多道次仿真分析方法.对某11道次H型钢多道次粗轧过程的仿真计算表明:轧制力的计算结果和现场实测数据吻合较好,现有多道次粗轧工艺对轧件腹板的晶粒细化作用较为明显.