群速度和相速度的微机模拟

本文介绍了作者开发的群速度和相速度微机模拟软件的程序设计和实现．该软件做为演示实验已经取得了良好的效果．     

固体吸附制冷系统发生器温度场数值模拟

以内燃机排气－固体吸附制冷系统为背景，建立了固体吸附制冷系统发生器瞬态温度场数值计算模型，并讨论模型中涉及的部分物性参数。通过实验验证，该模型能较好地模拟发生器内瞬态温度场。     

复杂系统集成控制及其仿真研究

本文对于复杂系统提出一种集成控制策略,即解耦/模糊控制。并以机器人关节运动控制为例,进行仿真研究,仿真结果是令人满意的。全文包括五个部分:1.前言;2.复杂系统的解耦模型;3.复合规则库与模糊控制;4.仿真研究;5.结论。     

分子筛晶内扩散系数测定的新公式

用程序升温热脱附方法，通过一次实验即可得到不同温度的分子筛晶内扩散系数，考虑到在脱附初期，吸附分子的浓度较大，可能存在相互作用的影响，本文提出了处理热脱附失重曲线的新公式，并用两组分子筛样品进行了验证，结果表明，新公式明显优于旧公式。     

电离层薄层倾斜带来的电离层附加时延偏差分析

在考虑电离层薄层倾斜的基础上,数值模拟、分析了电离层倾斜带来的电离层附加时延相对不考虑电离层倾斜的偏差,从而说明了在电离层倾斜地区消除电离层倾斜的必要性     

AUTO-QUAL-SS水质模式的不确定性分析

本文采用Monte Carlo仿真技术,对AUTO-QUAL-SS模式用于黄浦江水质研究时的不确定性问题,作一些初步的分析讨论。确定了影响模式不确定性的重要因素以及较重要的水质指标DO浓度的不确定性程度。其方法和结论可供水质模式工作者和决策分析人员参考。     

W_(18)Cr_4V钢真空油淬白亮层、熔化层形成原因的试验研究

W_(18)Cr_4V钢真空加热油淬后,表面出现白亮层和熔化层等异常现象。本文利用金相显微镜,显微硬度计、扫描电子显微镜和电子探针等手段对白亮层和熔化层进行了分析研究。试验表明,白亮层、熔化层均是真空油淬增碳的结果。本文对白亮层、溶化层形成原因进行了比较深入的分析探讨提出了产生白亮层必须同时具备的三个条件。     

A Survey of the Use of the Discrete-event Simulation in Manufacturing Industry

In this work, a survey of companies has been produc ed from a questionnaire and in-depth inter-views. The aimof the paper is to give a current view of the use of DES (Discrete- Event Simulation) in the indust ry. The companies have been selected in a wide range in e.g. size, capital turno ver and employees. The survey was restricted to Sweden, although the results may be applicable to other countries with similar industrial structure. Some of the companies investigated are also multinational with branc...     

Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of “vaulted profile“, heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).