基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

塔东热液地质作用机制及对储层的改造意义

塔东地区断裂发育，早期发育的断裂与晚期断裂之间存在相互改造、叠加、复合的过程，深大断裂沟通多套地层，断裂活动期形成的挤压破碎带和断裂裂缝带作为岩浆热液上升通道，为热液溶蚀作用改造储层提供了有利条件，因此，识别出热液期次对塔东白云岩储层成因机制具有重要意义。通过对钻井岩芯、岩屑及岩石薄片、铸体薄片观察鉴定分析，在区内下古生界碳酸盐岩中识别和发现了钠长石化作用和自生羽毛状伊利石沉淀，也是塔里木盆地内的首次发现，并通过对包裹体均一温度，碳氧同位素等地化特征研究，揭示其成岩流体源于岩浆热液，丰富了区内热液作用的矿物学标志，进一步识别出区内存在3期热液作用，通过对3期热液作用的机制及其储渗空间意义的研究，总结出第I期热液作用对于储层形成意义不大，第Ⅱ期热液作用主要发育在局限的沉积环境，第Ⅲ期热液溶蚀形成溶蚀缝孔洞，与天然气运移聚集匹配良好，构成了区内天然气聚集成藏的主要储渗空间。     

论经济法的调整对象范围

关于经济法的调整对象历来是经济法学甚至包括民法学、行政法学界争执的一个焦点,但是大家还是就经济法的基本理念达成了共识,即经济法是国家干预市场经济的基本法律形式,鉴于我国完全不同于西方的市场进化模式,当前我国国家干预市场的范围应当严格限定,干预市场与培育市场应当两种手段并存.经济法以社会公共利益为本位的法益追求是经济法区别于传统的公法和私法独立存在的根本理由.在此基础上再界定经济法的调整对象也就不再困难.     

化工测量中的干扰分析及抗干扰方法

分析了化工测量中的干扰问题，并结合多年来的工作实践，提出了一些抗干扰的方法。     

硼对12Ni3CrMoV高强度钢焊接接头冷裂敏感性的影响

低碳调质高强度钢中添加硼对焊接冷裂敏感性的影响较少有人研究,并存在两种不同意见.本文对含硼量分别为0.005%,0.0014%,0.0028%,0.0035%的12Ni3CrMoV调质高强度钢焊接冷裂敏感性进行研究.试验结果表明:1.插销试验临界应力:含硼钢比无硼钢(含硼0.0005%)高;含硼钢中,临界应力按含硼量0.0014%,0.0028%,0.0035%的顺序递减.2.扫描电镜断口分析:无硼钢有沿晶断裂区、准介理断裂区和韧窝断裂区.含硼钢没有沿晶断裂区,只有准介理断裂区和韧窝断裂区.3.焊条未烘干时,无硼和含硼钢的插销临界应力都降低,无硼钢沿晶断裂区扩大,含硼钢仍无沿晶断裂区.4.硼在HAZ粗晶区中沿奥氏体晶界形成偏聚带,硼相主要沿奥氏体晶界呈不连续点状析出.含硼愈多,沿奥氏体晶界偏聚和硼相析出也愈多.5.C.D.Beachem提出的断口形貌发展过程示意图可以解释无硼钢断裂,不能完全解释含硼钢断裂过程.6.裂纹敏感性成分Pcm值表达式中,硼项系数为" 5"值得商榷.就本文钢材而言,硼项函数应为"负变数".本文对含硼钢延迟裂纹机理作了探讨.     

用多剖面法测试焊接接头的断裂韧性

本文用试验测定和理论计算表明,在多剖面法中利用复合试样测定焊接接头断裂韧性时,可测到的HAZ小区与板厚、试样厚度、线能量、预热温度及坡口角度等因素有关,并非总能测出全部小区的δ_(is)值.对提高测试精度的有关技术问题进行了探讨.     

Targeted inhibition of Livin resensitizes renal cancer cells towards apoptosis

Cancer cells are typically characterized by apoptosis deficiency. In order to investigate a possible role for the anti-apoptotic livin gene in renal cell cancer (RCC), we analyzed its expression in tumor tissue samples and in RCC-derived cell lines. In addition, we studied the contribution of livin to the apoptotic resistance of RCC cells by RNA interference (RNAi). Livin gene expression was detected in a significant portion of RCC tumor tissue specimens (13/14, 92.9%) and tumor-derived cell lines (12/15, 80.0%). Moreover, targeted inhibition of livin by RNAi markedly sensitized RCC cells towards proapoptotic stimuli, such as UV irradiation or the chemotherapeutic drugs etoposide, 5-fluorouracil, and vinblastine. These effects were specific for livin expressing tumor cells. We conclude that livin can contribute significantly to the apoptosis resistance of RCC cells. Targeted inhibition of livin could represent a novel therapeutic strategy to increase the sensitivity of renal cancers towards pro-apoptotic agents. Received 30 November 2006; received after revision 22 February 2007; accepted 20 March 2007     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

闸河区周边重合断裂方位分布特征及其导水趋势分析

本文应用了遥感这一先进工具,在地壳表层现实资料及地球遥感影象特征基础上,发展了遥感地质灾害方面研究新理论——重合断裂方位破裂理论,来为防治水害直接提供导水断裂趋势分布特征.