火焰原子吸收光谱法测定奶粉中的锌含量

采用混酸、超声波消解法进行奶粉样品处理,用火焰原子吸收光谱法测定其锌的含量,测定结果准确可靠,省时、省力、经济、环保,避免了传统的灰化法或消化法处理奶粉样品的繁琐操作及对环境所造成的污染.     

低碳钢和不锈钢圆管轴向冲击碰撞吸能特性研究

针对金属圆管的吸能设计，通过落锤试验和动力显式有限元法对低碳钢和不锈钢圆管的碰撞吸能特性进行了研究。研究发现：轴向冲击下圆管的失效模式分为轴对称模式、过渡模式和非轴对称模式，初始几何缺陷的随机性是产生不同失效模式的原因之一。给出了平均碰撞力的设计公式，最后探讨了采用铝基蜂窝状填充材料对圆管耐撞强度的影响。     

原子序数与镧系离子理化性质的相关性研究

用原子序数(N)代表镧系离子(Ln^3 )大体结构效应的因素，并将N对镧系离子的16种理化性质(P)进行线性回归，回归方程均在0．001显水平下通过F检验，估算值与实验值都很好吻合。     

Atomic phase diagram

Based on the Thomas-Fermi-Dirac-Cheng model, atomic phase diagram or electron density versus atomic radius diagram describing the interaction properties of atoms of different kinds in equilibrium state is developed. Atomic phase diagram is established based on the two-atoms model. Besides atomic radius, electron density and continuity condition for electron density on interfaces between atoms, the lever law of atomic phase diagram involving other physical parameters is taken into account, such as the binding energy, for the sake of simplicity.     

Computer simulation for the precipitation process of Ni75Al7.5V17.5 alloy

The precipitation mechanism of Ni75Al7.5V17.5 alloy above the L12 instability line, between the L12 and D022 instability lines and below the D022 instability line are studied using microscopic phase-field kinetic equation. This paper is aimed at investigating the effect of temperature on precipitation mechanism and morphological evolution of the alloy. Our simulations demonstrate that the precipitation is a mixed mechanism of non-classical nucleation growth and spinodal decomposition above the L12 instability line. It needs certain thermal fluctuations for nucleation and the number of θ phases is small at this temperature. The precipitation mechanism of γ'phase is congruent ordering followed by spinodal decomposition, and θ phase is a mixed mechanism of non-classical nucleation growth and spinodal decomposition between the L12 and D022 instability lines. The mechanism below the D022 instability line is similar to that between the L12 and D022 instability lines. With the decrease of the temperature, ordering and phase separation becomes fast, the dimension of γ'phase becomes small, the shape transforms from equiaxed to block, the dimension of θ phase becomes large and the shape transforms from strip to circle.     

纳米Al2O3/PVAc复合材料的制备与表征

用硝酸铝和碳酸铵为原料,以聚乙二醇为分散剂,采用溶胶-凝胶法制备了纳米Al2O3溶胶.用液-液混合分散法将制得的纳米Al2O3溶胶分散于聚醋酸乙烯酯(PVAc)的丙酮溶液中,得到无色透明的纳米Al2O3/PVAc复合溶胶,将溶胶刮涂制膜,得无色透明的Al2O3/PVAc复合膜.用透射电子显微镜和拉曼光谱对复合材料进行了表征.激光粒度分析仪分析表明,Al2O3在PVAc粒径在30～35 nm范围内,平均密度31.2 nm、体积平均27.5 nm、数均25.3 nm .Zeta电位值为-42.5 mV.并对Al2O3/PVAc复合溶胶进行紫外吸收测试,结果显示,与纯PVAc溶液相比,最大吸收峰蓝移10.4 nm,且吸光度增加2.3倍.     

用原子吸收光谱法测定交联聚合物中的铬含量

用原子吸收光谱法直接测定了聚丙烯酰胺中的铬含量 ,并对影响铬测量值的因素进行了分析。实验结果表明 ,加入交联剂可有效地提高聚合物溶液的粘度 ,改善聚合物的抗温、抗盐、抗剪切的性能 ,从而提高聚合物驱油效果。对空白试剂进行了考察 ,该测量方法的相对标准偏差为 2 .3% ,试样加标回收率达到 95 %～ 10 5 %。铬的检出限为 0 .0 16mg/L。实际测定了不同浓度聚丙烯酰胺中的铬含量 ,测量结果的相对误差小于 1%。     

激光冷却和操控原子:原理与应用

 利用激光进行冷却和囚禁原子,可降低原子热运动速度、实现原子的量子操控,在精密测量等领域具有重要应用。本文概述了激光冷却和囚禁原子技术的发展历程及其基本原理,综述了该技术在玻色-爱因斯坦凝聚、原子钟和原子干涉仪等领域的应用。     

Preparation and characterization of doubly substituted microwave absorbing material by sol-gel technique for super high frequency applications

Rare earth Dy~(3+)and divalent Mn~(2+)elements substituting W-type hexagonal ferrites Ba_(1-x)Dy_xZn_2Fe_(16-y)Mn_yO_(27)(x=0,0.02,0.06,0.1 and y=0,0.1,0.3,0.5)were prepared by sol-gel method.The thermo-gravimetric analysis(TGA)and differential scanning calorimetry(DSC)was carried out to find the temperature at which single phase can be obtained.XRD patterns indicate the presence of the single phase for all the synthesized samples with the absence of any extra peak due to unreacted material and secondary phases.The occurrence of absorption bands at low wave numbers(563 and 446 cm~(-1)),can be assigned to the stretching vibration of metal and oxygen ions in FTIR spectra,which also confirms the single hexagonal phase for prepared material.The grains are of platelet like structure,which enhances the microwave absorption properties of hexagonal ferrites.The synthesized material exhibits the minimum reflection loss of-20.9 dB at 11.8 GHz frequency,which reflects the applications of this material in super high frequency devices.The microwave conductivity of the material increases with frequency.